Features
- Eight P.A. Semi PWRficient PA6T-1682 general-purpose processing nodes
- One P.A. Semi PWRficient PA6T-1682 I/O and utility processor node
- ATCA base support
- ATCA 10 Gbps XAUI fabric support
- Up to 4 GB of DDR2 ECC SDRAM per processor node
- Up to 2 MB of LPC NOR flash per processor node
- Up to 2 MB of SPI NOR flash per node
- Up to 4 GB of NAND flash
- PCI Express interconnect
- Gigabit Ethernet interconnect
- Linux LSP
- VxWorks BSP
- QNX BSP
Description
The XCalibur1411 is a high-performance AdvancedTCA (ATCA) single-board multiprocessing computer for applications requiring the maximum computing power available per blade. Nine P.A. Semi PWRficient PA6T-1682 dual-core processors, each with two PA6T Power Architecture cores operating at up to 2.0 GHz, provide ample computing bandwidth. Each dual-core processor is complemented with two channels of up to 2 GB each of DDR2 ECC SDRAM, providing up to 36 GB of total onboard SDRAM.
Each processing node is interconnected through a x2 PCI Express link to the utility processor and two 1-Gbps SGMII interfaces to a Gigabit Ethernet switch. The Gigabit Ethernet switch also provides two 10-Gbps XAUI ATCA fabric interface ports.
The utility processor supports 2 MB of LPC NOR flash, 2 MB of SPI NOR flash, as well as 4 GB of NAND flash for non-volatile storage. Each node processor supports up to 2 MB of LPC NOR flash and 2 MB of SPI NOR flash.
The XCalibur1411 is a powerful, feature-rich solution for the next generation of computationally intensive embedded applications. Operating system support for VxWorks, QNX, and Linux 2.6 are available.
Technical Specifications
Processing Nodes
- P.A. Semi PWRficient PA6T-1682 processor
- Dual PA6T Power Architecture cores at up to 2.0 GHz each
- 2 MB of shared L2 cache
- 4 KB I²C EEPROM
- Up to 2 MB of LPC NOR flash
- Up to 2 MB of SPI NOR flash
- Two channels of DDR2 ECC SDRAM, up to 4 GB (2 GB each)
Utility Node
- P.A. Semi PWRficient PA6T-1682 processor
- Dual PA6T Power Architecture cores at up to 2.0 GHz each
- 2 MB of shared L2 cache
- 4 KB I²C EEPROM
- Two channels of DDR2 ECC SDRAM, up to 4 GB (2 GB each)
- Up to 4 GB of NAND flash
- Up to 2 MB of LPC NOR flash
- Up to 2 MB of SPI NOR flash
- Two front-panel RJ-45 Gigabit Ethernet ports
- Front-panel Micro DB-9 RS-232 console port
ATCA
- PICMG 3.0
- PICMG 3.1, 10-Gbps XAUI fabric
IPMI
- Ability to control power and reset
- Monitors 0.9V, 1.1V, Vcore, 1.2V, 2.5V, 3.3V, 5.0V, 12V
- Monitors board temperature
Software Support
- QNX Neutrino 6.3.0 BSP
- VxWorks 5.5 and 6.2 BSPs
- Linux 2.4 and 2.6 LSPs
Physical Characteristics
- ATCA form factor
- 1564 g (55.17 oz.) board weight
Environmental Requirements
- Operating temperature: 0 to 55 ºC (ambient, at board)
- Humidity: 0% to 85%
- Storage temperature: -40 to 70 ºC
Power Requirements
- 200 Watts
