XCalibur4401

Intel® Core™ i7 Processor-Based Conduction- or Air-Cooled 6U CompactPCI Single Board Computer (SBC)

The XCalibur4401 provides up to 16 GB of DDR3 ECC SDRAM in two channels, one XMC/PrPMC slot, and up to 128 GB of NAND flash.

It also supports Gigabit Ethernet, SATA, I²C, USB, XMC I/O, PMC I/O, and DVI graphics out the back and front panel connectors.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050280 Category:
XCalibur4401 6U cPCI SBC

The XCalibur4401 is a high-performance, 6U CompactPCI, multiprocessing, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption.

With the 2nd or 3rd generation Intel® Core™ i7 processor, the XCalibur4401 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.

The XCalibur4401 provides up to 16 GB of DDR3 ECC SDRAM in two channels, one PrXMC/PrPMC slot, and up to 128 GB of NAND flash. The XCalibur4401 also supports Gigabit Ethernet, SATA, I²C, USB, PMC I/O, XMC I/O, and DVI graphics out the connectors.

The XCalibur4401 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.

Features

  • Supports 2nd and 3rd generation Intel® Core™ i7 processors
  • Quad- or dual-core processor with Intel® Hyper-Threading Technology
  • 6U CompactPCI module
  • Conduction or air cooling
  • Up to 16 GB of DDR3 ECC SDRAM in two channels
  • Up to 128 GB of NAND flash
  • Three front panel Gigabit Ethernet ports
  • Dual rear panel Gigabit Ethernet ports
  • Two rear panel USB 2.0 high-speed ports
  • Four rear panel SATA ports
  • One XMC/PMC interface
  • Front and rear graphics ports
  • Complies with PICMG 2.0, 2.1, 2.3, 2.9, 2.16
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Technical Specs

Processor

  • Quad- or dual-core Intel® Core™ i7
  • Intel® Turbo Boost Technology
  • Intel® Hyper-Threading Technology
  • AVX instruction set extensions
  • Integrated with Intel® QM67 chipset
  • Dual-channel integrated memory controller

Quad-Core Processor Configurations

  • Core™ i7-3612QE: 2.1 GHz, 6 MB cache

Dual-Core Processor Configurations

  • Core™ i7-2655LE: 2.2 GHz, 4 MB cache
  • Core™ i7-2610UE: 1.5 GHz, 4 MB cache
  • Core™ i7-3555LE: 2.5 GHz, 4 MB cache
  • Core™ i7-3517UE: 1.7 GHz, 4 MB cache

Memory

  • Up to 16 GB of DDR3 ECC SDRAM in two channels
  • Up to 128 GB of NAND flash

Security and Management

  • Baseboard Management Controller (IPMI)
  • Optional Trusted Platform Module (TPM)
  • Non-volatile memory write protection

cPCI

  • 66 MHz 32-bit PCI interface to J1 and J2
  • PICMG 2.1 (Hot Swap support)
  • PICMG 2.3 (PMC I/O to P3 and P5)
  • PICMG 2.9 (dedicated IPMI controller)
  • PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)

PrPMC

  • PCI-X (32/64-bit, 66/100 MHz)
  • PCI (32/64-bit, 33/66 MHz)

XMC (VITA 42.3)

  • One SATA port capable of 6 Gb/s
  • x8 PCI Express Gen2 (5 GT/s)
  • Intel® High Definition Audio port
  • Two USB 2.0 ports

Front Panel I/O (Optional)

  • DVI-D interface
  • Three 10/100/1000BASE-T Ethernet ports
  • Two USB 2.0 ports
  • General-purpose LEDs

Back Panel

  • Two RS-232/422/485 serial ports
  • Two 10/100/1000BASE-T Ethernet ports
  • Four SATA ports capable of 3 Gb/s
  • PMC I/O
  • Two USB 2.0 ports
  • DisplayPort interface

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Press Release

View the press release for the XCalibur4401

View Press Release

Datasheet

View the XCalibur4401
Datasheet PDF

Download Datasheet

6U cPCI SBCs

View the full selection of 6U cPCI SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc