XPort9200

Conduction- or Air-Cooled 12-Channel High-Speed CAN Bus XMC or PMC Module

The XPort9200 is a conduction- or air-cooled 12-channel CAN bus XMC or PMC module. Each high-speed CAN bus 2.0 A/B channel is galvanically isolated and supports up to 1 Mbps. The XPort9200 supports a x1 PCIe XMC or 32-bit PCI PMC interface.

All 12 CAN bus channels can be supported through the PMC P14, XMC P16, or front panel connector. Optional on-card termination also is available for each channel.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90010330 Category:
XPort9200 XMC or PMC High-Speed CAN Bus Module

The XPort9200 is a conduction- or air-cooled 12-channel CAN bus XMC or PMC module. Each high-speed CAN bus 2.0 A/B channel is galvanically isolated and supports up to 1 Mbps.

The XPort9200 supports a x1 PCIe XMC or 32-bit PCI PMC interface. All 12 CAN bus channels can be supported through the PMC P14, XMC P16, or front panel connector. Optional on-card termination also is available for each channel.

The XPort9200 utilizes an FPGA implementation of the NXP SJA1000 CAN bus controller and supports Linux SocketCAN. Wind River VxWorks and Microsoft Windows drivers also are available.

Features

  • 12 galvanically isolated CAN bus channels
  • Compliant with CAN specifications 2.0A (11-Bit-ID) and 2.0B (29-Bit-ID)
  • High-speed ISO 11898-2-compliant CAN bus channels
  • Up to 1 Mbps per CAN bus channel
  • On-card termination (optional)
  • Conduction- or air-cooled
  • Front panel, PMC P14, or XMC P16 I/O
  • XMC PCIe or PMC PCI interface
  • Conformal coating available
  • NXP SJA1000- compatible CAN Controller (FPGA implementation)
  • Linux SocketCAN support
  • Wind River VxWorks and Microsoft Windows support

Technical Specs

P15 XMC Interface

  • VITA 42.3 x1 PCI Express port

P11-P12 PMC Interface

  • 32-bit / 66 MHz PCI

Rear I/O XMC/PMC Interface

  • 12 CAN bus channels via PMC P14 or XMC P16

Software Support

  • Wind River VxWorks BSP
  • Linux SocketCAN BSP
  • Microsoft Windows drivers

Physical Characteristics

  • XMC/PMC conduction- or air-cooled form factor
  • Conduction cooling per VITA 20
  • Dimensions: 143.75 mm x 74 mm

CAN Bus Interface

  • Galvanically isolated
  • ISO 11898-2-compliant
  • Up to 1 Mbps per channel
  • Compliant with CAN specifications 2.0A (11-Bit-ID) and 2.0B (29-Bit-ID)

Configuration Options

  • PMC or XMC
  • Front panel, P16 or P14 I/O
  • Front panel I/O via optional breakout card accessory

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration. Please consult factory.

Accessories

  • XIt2500 (90060365) - XIM/PIM transition module for XPort9200 rear I/O
  • XTend301 (90071875) - Development breakout module

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XPort9200
Datasheet PDF
 

Download Datasheet

XMC/PMC I/O Modules

View the full selection of XMC/PMC I/O Modules
from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc