The XCalibur1900 is a high-performance, 6U cPCI, single board computer supporting an NXP (formerly Freescale) QorIQ T2080 processor.
The XCalibur1900 provides up to 8 GB of DDR3 ECC SDRAM, two XMC/PrPMC slots, and 512 MB of NOR flash (with redundancy). The XCalibur1900 supports three Gigabit Ethernet ports, PMC I/O, USB 2.0, SATA ports capable of 3 Gb/s, and RS-232/422/485 serial ports out backplane connectors, and Gigabit Ethernet, USB 2.0, and RS-232 serial out the front panel. One 10GBASE-T port to front panel using I/O mezzanine card is also optionally supported.
The XCalibur1900 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks, Linux, and Green Hills INTEGRITY Board Support Packages (BSPs) are available. Wind River VxWorks and Linux BSPs may optionally be paired with the NXP hypervisor software to facilitate secure partitioning.
Technical Specs
Processor
- NXP (formerly Freescale) QorIQ T2080 processor
- Four dual-threaded e6500 cores at 1.8 GHz
- 2 MB of shared L2 cache
Memory
- Up to 8 GB of DDR3 ECC SDRAM
- Up to 512 MB of NOR flash (with redundancy)
- Up to 32 GB of NAND flash
- Up to 64 GB of SATA NAND flash (optional)
cPCI
- 66 MHz 32-bit PCI interface to J1 and J2
- PICMG 2.1 (Hot Swap support)
- PICMG 2.3 (PMC I/O to J3 and J5)
- PICMG 2.9 (dedicated IPMI controller)
- PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)
XMC/PrPMC
- PCI-X (64/32-bit, 100/66 MHz)
- PCI (64/32-bit, 66/33 MHz)
- x8 PCI Express port to J15 and J25 (XMC)
Front Panel (Optional)
- Two RS-232 serial ports
- One Gigabit Ethernet port
- One USB 2.0 port
- One 10GBASE-T port to front panel using I/O mezzanine card
- General-purpose LEDs
Back Panel
- Two RS-232/422/485 serial ports
- Two Gigabit Ethernet ports
- Two SATA ports capable of 3 Gb/s
- Up to two USB 2.0 ports
- PMC I/O
IPMI
- Onboard management controller
Software Support
- Wind River VxWorks BSP with optional NXP hypervisor support for secure partitioning
- Linux BSP with optional NXP hypervisor support for secure partitioning
- Green Hills INTEGRITY-178 BSP
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
