XCalibur1930

NXP (formerly Freescale) QorIQ T2080 Processor-Based Conduction- or Air-Cooled 6U VME SBC

With four dual-threaded e6500 cores running at up to 1.8 GHz, each with a 128-bit AltiVec SIMD unit, the T2080 delivers enhanced performance and efficiency for today's embedded computing applications.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050345 Category:
XCalibur1930 6U VME SBC

The XCalibur1930 is a high-performance, 6U VME, multiprocessing, single board computer that is ideal for ruggedized systems requiring high bandwidth processing and low power consumption. With four dual-threaded e6500 cores running at up to 1.8 GHz, each with a 128-bit AltiVec SIMD unit, the NXP (formerly Freescale) QorIQ T2080 delivers enhanced performance and efficiency for today’s embedded computing applications.

The XCalibur1930 provides up to 8 GB of DDR3 ECC SDRAM, two XMC/PrPMC slots, and 512 MB of NOR flash (with redundancy). The XCalibur1930 also supports Gigabit Ethernet, PMC I/O, USB, SATA, and RS-232/422/485 serial ports out the P2 backplane connectors. The front panel supports 10 Gigabit Ethernet, Gigabit Ethernet, USB 2.0, and RS-232 serial ports.

The XCalibur1930 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks, Linux, and Green Hills INTEGRITY Board Support Packages (BSPs) are available. Wind River VxWorks and Linux BSPs may optionally be paired with the NXP hypervisor software to facilitate secure partitioning.

Features

  • NXP QorIQ T2080 processor with four dual-threaded e6500 cores at up to 1.8 GHz
  • 6U VME module
  • Conduction or air cooling
  • Up to 8 GB DDR3 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 64 GB of CPU NAND flash
  • Up to 64 GB of SATA NAND flash (optional)
  • Up to five Gigabit Ethernet ports
  • One 10GBASE-T to front panel using I/O mezzanine card (optional)
  • x8 PCI Express to XMC sites
  • Two SATA ports
  • Two USB 2.0 ports
  • Up to four RS-232/422/485 serial ports
  • Two XMC/PrPMC interfaces
  • NXP hypervisor support for secure partitioning
  • Wind River VxWorks BSP
  • Linux BSP
  • Green Hills INTEGRITY BSP
  • Contact factory for availability of QNX Neutrino and LynuxWorks LynxOS

Technical Specs

Processor

  • NXP (formerly Freescale) QorIQ T2080 processor
  • Four dual-threaded e6500 cores at up to 1.8 GHz
  • 2 MB of shared L2 cache

Memory

  • Up to 8 GB of DDR3 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 32 GB of NAND flash
  • Up to 64 GB of SATA NAND flash (optional)

VME

  • VME64 (VITA 1-1994 R2002)
  • VME64x (VITA 1.1-1997 R2003)
  • 2eSST (VITA 1.5-2003)
  • Ethernet on VME64x (VITA 31.1-2003)
  • PMC I/O on VME (VITA 35-2000)

XMC/PrPMC

  • PCI-X (64/32-bit, 100/f)
  • PCI (64/32-bit, 66/33 MHz)
  • x8 PCIe port to P15 and P25 (XMC)

Front Panel (Optional)

  • Two RS-232 serial ports
  • Two Gigabit Ethernet ports
  • One USB 2.0 port
  • One 10GBASE-T port to front panel using I/O mezzanine card
  • General-purpose LEDs

Back Panel

  • Up to four RS-232/422/485 serial ports
  • Three Gigabit Ethernet ports
  • Two SATA ports capable of 3 Gb/s
  • PMC I/O
  • One or two USB 2.0 ports

Software Support

  • Wind River VxWorks BSP with optional NXP hypervisor support for secure partitioning
  • Linux BSP with optional NXP hypervisor support for secure partitioning
  • Green Hills INTEGRITY-178 BSP
  • Contact factory for availability of QNX Neutrino and LynuxWorks LynxOS BSPs

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • XIt1010 (90060230) - 6U VME Rear Transition Module (RTM) with Serial, Ethernet, USB, and SATA
  • XTend300 (90070180) - 1x Female DB-9 to 2x Male DB-9 Serial Port Converter
  • Cable (90000075) - Serial, Micro D to DB-9, F to M, 3 ft.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

VME Bridge

XCalibur1930 features a Xilinx Artix-7-based VME Bridge

View More

NXP Hypervisor

NXP hypervisor software for secure partitioning

View Hypervisor

Product Brief

NXP QorIQ T-Series
Product Brief

View Brief

Datasheet

View the XCalibur1930
Datasheet PDF

Download Datasheet

6U VME SBCs

View the full selection of 6U VME SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc