XIt1009

6U cPCI I/O Transition Module for X-ES SBCs

The XIt1009 supports an HDMI port for graphics, as well as two PICMG 2.16 10/100/1000BASE-T Ethernet ports, two RS-232 Serial ports, four SATA ports, and three USB ports. Internal connectors allow access to two additional USB ports, two serial ports, and GPIO.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90060335 Categories: ,
XIt1009 6U cPCI RTM

The XIt1009 is a 6U CompactPCI transition module which supports a variety of cPCI single board computers.

The XIt1009 supports an HDMI port for graphics, as well as two PICMG 2.16 10/100/1000BASE-T Ethernet ports, two RS-232 Serial ports, four SATA ports, and three USB ports. Internal connectors allow access to two additional USB ports, two serial ports, and GPIO.

The XIt1009 supports a PIM interface to bring P14 I/O from a PMC module out the rear panel. The PIM interface can be configured for either mezzanine site on the single board computer and can support all standard X-ES I/O modules.

Features

  • 6U transition module
  • One HDMI port
  • Two PICMG 2.16 10/100/1000BASE-T Ethernet ports
  • Supports one PIM (PMC I/O Module) interface to route PMC I/O out the rear panel
  • Three USB 2.0 ports
  • Two serial ports via one micro-DB-9 connector
  • Four SATA ports via one SAS connector
  • Two internal USB ports
  • Two internal serial ports
  • GPIO header in board

Technical Specs

PIM Support

  • Supports standard PIM modules
  • Option to have PIM connected to J3 or J5 PMC I/O

Graphics

  • One external HDMI port
  • Actively converts Dual-Mode DisplayPort to HDMI
  • Option to pass DVI/HDMI straight through to HDMI connector

SATA

  • One SAS connector supporting four SATA ports via breakout cable

Ethernet

  • Two RJ-45 Gigabit Ethernet ports

USB

  • Three external USB 2.0 ports
  • Two internal USB 2.0 ports

Serial

  • Two internal RS-232/422/485 serial ports
  • Two rear panel RS-232 serial ports through single micro-DB-9 connector

Physical Characteristics

  • 6U cPCI transition module form factor
  • Dimensions: 233.35 mm x 80 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Accessories

  • XTend300 (90070180) - 1x Female DB-9 to 2x Male DB-9 Serial Port Converter
  • Cable (90000075) - Serial, Micro D to DB-9, F to M, 3 ft.
  • Cable (90000165) - HDMI to HDMI, M to M, 2 Meter
  • Cable (90000170) - HDMI to DVI-D, M to M, 2 Meter

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XIt1009
Datasheet PDF

Download Datasheet

6U cPCI RTMs

View the full selection of 6U cPCI RTMs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc