XPedite5201

NXP PowerQUICC™ III MPC8548E Processor-Based Conduction-Cooled XMC/PMC Module

The XPedite5201 is a high-performance, conduction-cooled Processor PCI Mezzanine Card (PrPMC)/XMC featuring the NXP (formerly Freescale) PowerQUICC™ III MPC8548E processor running at up to 1.333 GHz.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

XPedite5201 Freescale MPC8548E PowerQUICC™ III XMC/PMC Module

The XPedite5201 is a high-performance, conduction-cooled Processor PCI Mezzanine Card (PrPMC)/XMC featuring the NXP (formerly Freescale) PowerQUICC™ III MPC8548E processor running at up to 1.333 GHz. The onboard PowerQUICC™ III provides integrated 64-bit PCI-X, DDR2-400/533 SDRAM, PCI Express, and two Gigabit Ethernet interfaces, making the XPedite5201 an optimal solution for communications processing and general computing applications alike.

When used as an XMC (VITA 42) module, the x8 PCI Express interface can be used, in parallel or in substitution of the PCI-X interface. With software supplied by Extreme Engineering Solutions, the XPedite5201 can be installed on standard VME and CompactPCI (cPCI) platforms as well as custom motherboards that support PMC sites.

The XPedite5201 provides two Gigabit Ethernet interfaces via the P14 backplane connector.

Features

  • NXP (formerly Freescale) PowerQUICC™ III MPC8548E processor at up to 1.333 GHz
  • Conduction-cooled XMC/PMC module
  • 133 MHz, 64-bit PCI-X
  • x8 PCI Express
  • Up to 4 GB DDR2-533 SDRAM
  • 512 kB L2 cache
  • Double-precision Floating-Point Unit (FPU)
  • Up to 256 MB of soldered NOR flash
  • Up to 4 GB of NAND flash
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • Linux BSP

Technical Specs

Processor

  • NXP (formerly Freescale) PowerQUICC™ III MPC8548E processor
  • Embedded PowerPC e500 core at 1.0 to 1.333 GHz
  • 3065 MIPS at 1.333 GHz
  • 32 kB L1 instruction/data caches
  • 512 kB L2 cache
  • Double-precision Floating-Point Unit (FPU)
  • Integrated MMU
  • DDR2-533 SDRAM interface
  • x8 PCI Express
  • 133 MHz, 64-bit PCI-X 1.0a interface
  • Four 10/100/1000 Mbps, IEEE 802.3-compliant Ethernet controllers
  • Two serial controllers
  • Two I²C controllers

Memory

  • Up to 4 GB DDR2-533 SDRAM
  • Up to 256 MB NOR flash
  • Up to 4 GB NAND flash
  • 2 kB SEEPROM

XMC

  • x8 PCI Express (VITA 42.3)
  • IPMI FRU support
  • GPIO on user data

RTC

  • M41T00 I²C timekeeper
  • 60 hour clock retention

Rear I/O

  • Two Gigabit Ethernet ports
  • Four GPIO pins
  • Two RS-232 serial ports

Software

  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • Linux BSP

Physical Characteristics

  • XMC/PMC conduction-cooled form factor
  • Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Maximum power consumption: 13.35 W (with 1.333 GHz processor), 10.5 W (with 1 GHz processor)

Accessories

  • XTend200 (90070050) - Debug Module
  • XIt2040 (90060070) - PMC I/O Module (PIM) with Gigabit Ethernet and Serial

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XPedite5201
Datasheet PDF
 

Download Datasheet

XMC/PMC Mezzanines

View the full selection of
XMC/PMC Mezzanines
from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc