XPedite5330

NXP (formerly Freescale) Dual-Core PowerQUICC™ III MPC8572E Processor-Based Conduction- or Air-Cooled 3U cPCI SBC with Two Gigabit Ethernet Ports

The XPedite5330 is a conduction- or air-cooled 3U CompactPCI (cPCI) single board computer based on the NXP (formerly Freescale) MPC8572E PowerQUICC™ III processor. With dual PowerPC e500 cores running at up to 1.5 GHz, the MPC8572E delivers enhanced performance and efficiency for today's network information processing and other embedded computing applications.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90030080 Category:
XPedite5330 3U cPCI SBC

The XPedite5330 is a conduction- or air-cooled 3U CompactPCI (cPCI)single board computer based on the NXP (formerly Freescale) PowerQUICC™ III MPC8572E processor. With dual PowerPC e500 cores running at up to 1.5 GHz, the MPC8572E delivers enhanced performance and efficiency for today’s network information processing and other embedded computing applications.

Complementing processor performance, the XPedite5330 features two separate channels of up to 2 GB each of DDR2-667/800 ECC SDRAM, multiple PCI Express interfaces, XMC/PrPMC support, up to 256 MB of NOR flash(with redundancy), and up to 4 GB of NAND flash. Two Gigabit Ethernet ports, two RS-232/422/485 ports, and P14 I/O from the PrPMC are routed to J2 for additional system flexibility.

The XPedite5330 provides a high-performance, feature-rich solution for current and future generations of embedded applications. Operating system support packages for the XPedite5330 include Wind River VxWorks,Linux, QNX Neutrino, and Green Hills INTEGRITY.

Features

  • NXP PowerQUICC™ III MPC8572E processor with dual PowerPC e500 cores at up to 1.5 GHz
  • Conduction or air cooling
  • Extended shock and vibration tolerance
  • Up to 4 GB (2 GB each) DDR2-800 ECC SDRAM in two channels
  • Configurable as system controller or peripheral
  • Hosts an XMC or PrPMC
  • PrPMC P14 I/O out J2
  • Two 10/100/1000BASE-T Ethernet ports out J2
  • Two RS-232/422/485 serial ports out J2
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 4 GB of NAND flash
  • Front I/O available via plugover module
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Technical Specs

Processor

  • NXP (formerly Freescale) PowerQUICC™ III MPC8572E processor
  • Dual PowerPC e500 cores at up to 1.5 GHz
  • 1 MB of shared L2 cache

Memory

  • Up to 4 GB (2 GB each) of DDR2-800 ECC SDRAM in two channels
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 4 GB of NAND flash

J1 cPCI Interface

  • 32-bit PCI interface operating at 33 or 66 MHz
  • System controller capable with onboard clocking and arbitration
  • Peripheral slot capable

J2 cPCI Interface

  • Two 10/100/1000BASE-T Ethernet ports
  • Two RS-232/422/485 serial ports
  • PrPMC P14 I/O
  • Four GPIO signals

XMC/PrPMC Site

  • 32-bit, 66 MHz PCI bus (PMC interface)
  • x4 PCIe port (XMC interface)

Front Panel I/O

  • Front panel dual RJ-45 Ethernet and micro-DB-9 RS-232 serial ports available via optional plugover module

Software

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Physical Characteristics

  • 3U CompactPCI conduction- or air-cooled form factor
  • Dimensions: 100 mm x 160 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Maximum power consumption: 27 W (with 1.5 GHz processor), 24 W (with 1.333 GHz processor)

Accessories

  • XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XPedite5330
Datasheet PDF

Download Datasheet

3U cPCI SBCs

View the full selection of 3U cPCI SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc