XPedite6244

NXP (formerly Freescale) MPC7448 Power Architecture® Processor-Based AMC Module with Gigabit Ethernet, USB, and SATA Support

With an NXP (formerly Freescale) MPC7448 Power Architecture® processor running at up to 1.4 GHz, the XPedite6244 is ideal for the high-bandwidth processing requirements of today's blade and general computing applications.

End of Life

Please see recommended replacement product, the XPedite6101 NXP QorIQ T2081 XMC/PrPMC Module.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90015030 Category:
XPedite6244 Freescale Processor-Based AMC Module

The XPedite6244 is a high-performance AMC single board computer. With an NXP (formerly Freescale) MPC7448 Power Architecture® processor running at up to 1.4 GHz, the XPedite6244 is ideal for the high-bandwidth processing requirements of today’s blade and general computing applications.

A Marvell Discovery III system controller provides a high-performance communications channel between the processor, a DDR SDRAM interface, two SFP Gigabit Ethernet interfaces, a USB port, a SATA controller, and a two-port Gigabit Ethernet controller. The XPedite6244 supports up to 1 GB of local DDR memory.

For the system designer, the XPedite6244 provides a feature-rich solution to support the next generation of ATCA and MicroTCA embedded applications. Linux, Wind River VxWorks, Green Hills INTEGRITY, and QNX Neutrino Board Support Packages (BSP) are available.

Features

  • NXP (formerly Freescale) PowerPC MPC7448 processor at up to 1.4 GHz
  • Complies to AMC.0 and MicroTCA.0
  • Up to 1 GB DDR-400 SDRAM
  • Up to 64 MB soldered NOR flash
  • Two SFP Ethernet ports
  • Two RS-232 serial ports
  • One USB port
  • Ethernet AMC transport (optional)
  • SATA transport (optional)
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Technical Specs

Processor

  • NXP (formerly Freescale) PowerPC MPC7448 processor
  • 1.4 GHz max processor speed
  • 200 MHz bus speed

Non-Volatile Storage

  • Up to 64 MB soldered flash

DDR SDRAM

  • Up to 1 GB DDR-400

Ethernet

  • Two front panel SFP Gigabit Ethernet interfaces
  • Two AMC.2 lane 0 and 1 Gigabit interfaces

Serial

  • One front panel RS-232 port
  • One front panel USB port
  • One RS-232 AMC I/O port

SATA II

  • AMC.3 lanes 2 and 3

Software

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Physical Characteristics

  • AMC form factor
  • Dimensions: 180.6 mm x 73.5 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Power Requirements (Estimate)

  • +12 V, 2.25 A, 25 W

Accessories

  • Adapter (70003555) - Serial, Mini-USB to DB-9 (Female)

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

View the recommended replacement product, XPedite6101

View Product

Datasheet

View the XPedite6244
Datasheet PDF
 

Download Datasheet
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc