XPort3200

Freescale QorIQ P1020 Processor-Based Conduction- or Air-Cooled XMC/PMC IEEE 1588v2 Grandmaster Clock Module

The XPort3200 is capable of providing nanosecond-level time and frequency synchronization for Ethernet networks.

Support for multicast and optional unicast packets, along with grandmaster and slave operation, provide a complete IEEE 1588v2 solution.

End of Life (EOL)

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90015240 Category:
XPort3200 XMC/PMC Grandmaster Clock Module

The XPort3200 is a rugged, IEEE 1588v2 Precision Time Protocol (PTP) ordinary clock with grandmaster capabilities. Hardware options range from commercial/air-cooled to full-military conduction-cooled solutions.

The XPort3200 is capable of providing nanosecond-level time and frequency synchronization for Ethernet networks. Support for multicast and optional unicast packets, along with grandmaster and slave operation, provide a complete IEEE 1588v2 solution.

1 PPS and input clock synchronization, as well as configurable clock and 1 PPS outputs, allow for synchronizing the grandmaster to an external time reference or providing a frequency reference to an external device.

Features

  • Freescale QorIQ P1020 processor with dual PowerPC e500v2 cores at 800 MHz
  • Conduction or air cooling
  • Extended shock and vibration tolerance
  • 1 GB of DDR3-667 ECC SDRAM
  • x4 PCI Express or serial RapidIO interface to P15
  • PCI PrPMC interface
  • Two Gigabit Ethernet ports to P14 or P16
  • Two RS-232/422/485 serial ports to P14 or P16
  • One USB 2.0 port
  • 256 MB of NOR flash (with redundancy)
  • 16 GB of NAND flash
  • IEEE 1588v2 ordinary clock
  • IEEE 1588v2 boundary clock
  • 1 PPS and configurable frequency output
  • 1 PPS and reference frequency input (optional)
  • High-precision oven-controlled oscillator (OCXO)
  • GPS support (optional)
  • Linux BSP

Technical Specs

Processor

  • Freescale QorIQ P1020 processor
  • Dual PowerPC e500v2 cores at 800 MHz
  • 256 kB of shared L2 cache

IEEE 1588v2

  • Ordinary clock support
  • Boundary clock support
  • Grandmaster support
  • Multicast synchronization support
  • Unicast synchronization support (optional)
  • Nanosecond-level resolution
  • Oncard GPS time synchronization (optional)

Memory

  • 1 GB of DDR3-667 SDRAM
  • 256 MB of NOR flash (with redundancy)
  • 16 GB of NAND flash

Synchronous Ethernet

  • Support for distributing clock over Ethernet
  • Support for recovering Ethernet clock connection

PrPMC Interface

  • 66/33 MHz PCI
  • 32-bit bus interface

P15 XMC Interface

  • x4 configurable PCI Express or Serial RapidIO

P14/P16 XMC/PMC Interface

  • Two Gigabit Ethernet ports
  • Two RS-232/422/485 ports
  • 3.3 V GPIO
  • One USB 2.0 port
  • 1 PPS and reference frequency input (optional)
  • 1 PPS and configurable clock output

Software Support

  • Linux BSP

Physical Characteristics

  • Conduction- or air-cooled XMC/PMC form factor
  • Dimensions: 143.75 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Press Release
 

XPort3200 Grandmaster Clock Module Press Release

View Press Release

Datasheet
 

View the XPort3200
Datasheet PDF

Download Datasheet

XMC Networking Modules

View the full selection of XMC Networking Modules from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc