XChange4002

Conduction- or Air-Cooled 6U VME PMC Carrier Card

With PCI support between the two PMC slots and the VME64x 2eSST bridge, the XChange4002 is ideal for applications requiring the flexibility that PMC modules offer.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050450 Category:
XChange4002 6U VME PMC Carrier Card

The XChange4002 is a versatile conduction- or air-cooled 6U VME64x dual-PMC carrier card. With PCI support between the two PMC slots and the VME64x 2eSST bridge, the XChange4002 is ideal for applications requiring the flexibility that PMC modules offer.

The XChange4002 implements its VME64x interface using an FPGA device for maximum product longevity and field upgradeability. The XChange4002 includes a local +3.3 V power supply, so backplane +3.3 V is not required. 32 pins of P14 I/O from each PMC site are routed to the P2 connector per VME-P2-a,c (ANSI/VITA 35-2000).

Features

  • 6U VME64x, supporting VME64, VME64x, and 2eSST
  • Two PCI Mezzanine Card (PMC) sites
  • XMC support (optional)
  • Conduction or air cooling
  • 32-bit local PCI bus
  • 33/66 MHz PCI operation
  • 32 pins of P14 I/O from each PMC site to P2
  • FPGA-based VME interface

Technical Specs

VME

  • VME64 (ANSI/VITA 1-1994 R2002)
  • VME64x (ANSI/VITA 1.1-1997 R2003)
  • 2eSST (ANSI/VITA 1.5-2003)
  • FPGA-based bridge implementation

PCI

  • 32-bit, 33/66 MHz conventional PCI to PMC sites

PMC I/O

  • 32 pins of P14 I/O from each PMC site to P2 per VME-P2-a,c (ANSI/VITA 35-2000)

PCIe

  • x1 PCIe to PCIe-to-PCI bridge
  • x4 PCIe to XMC site (optional; root complex or endpoint mode)

Physical Characteristics

  • 6U VME form factor
  • Dimensions: 233.35 mm x 160 mm
  • 10 mm mezzanine stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • 5 V, 0.75 A, 3.75 W

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

VME Bridge

XChange4002 features a Xilinx Artix-7-based VME Bridge

View More

Datasheet

View the XChange4002
Datasheet PDF

Download Datasheet

6U VME Carriers

View the full selection of
6U VME Carriers from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc