XTend7103

COM Express® Carrier for COM Express® Type 10 Mezzanine Modules

The XTend7103 is a COM Express® carrier card designed to provide a low-cost and compact platform for the XPedite8150 and XPedite8152 COM Express® Type 10 mezzanine modules.

The XTend7103, in conjunction with a standard off-the-shelf 12 V power supply, provides a complete desktop or benchtop COM Express® platform for development, evaluation, and deployment.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90072695 Categories: ,
XTend7103 COM Express Carrier

The XTend7103 is a COM Express® carrier card designed to provide a low-cost and compact platform for the XPedite8150 and XPedite8152 COM Express® Type 10 mezzanine modules. The XTend7103, in conjunction with a standard off-the-shelf 12 V power supply, provides a complete desktop or benchtop COM Express® platform for development, evaluation, and deployment.

The XTend7103 provides I/O breakout for most of the interfaces on the XPedite8150 and XPedite8152 mezzanine modules. Serial, USB 3.0/2.0, Mini DisplayPort, dual Ethernet, and eSATA connectors are included. In addition, an expansion I/O connector provides I²C, SPI, GPIO, and control signal access.

Features

  • Single COM Express® site with AB connector
  • Supports Type 10 COM Express® modules
  • 12 V power supply connector
  • Supports XPedite8150 and XPedite8152 COM Express® modules from X-ES
  • Small Form Factor (SFF) design matches the outline of the XPedite8152

Technical Specs

COM Express® I/O

  • Two Ethernet ports
  • One USB 2.0 port
  • One USB 3.0 port
  • Two RS-232/422/485 serial ports
  • One Mini DisplayPort interface
  • Expansion I/O connector

Configurability Jumpers

  • Write protect
  • Boot flash swap
  • Independent control of serial port mode and termination

Expansion I/O Connector

  • Single micro-DB-25 connector
  • SPI
  • I²C
  • GPIO
  • Reset, write protect, and flash swap signals

Power Supplies

  • Onboard +5 V, +3.3 V for USB, DisplayPort, and serial transceivers
  • Single 12 V input

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option
  • Extended ruggedization options may be available, please contact factory

Power Requirements (From 12 V Supply)

  • Please consult factory.

Accessories

  • XPedite8150 (90010360) - Intel® Atom™ E3800 Series Processor-Based Rugged COM Express® Mini Module
  • XPedite8152 (90010390) - Intel® Atom™ E3800 Series Processor-Based Rugged COM Express® Mini Module with SLC NAND Flash
  • XPm9006 (90072855) - AC to DC, 12 V, 24 W Power Supply Module for XTend7103 Development and Testing

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XTend7103
Datasheet PDF

Download Datasheet
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc