XCalibur4500

5th Generation Intel® Core™ i7 Broadwell-H Processor-Based Conduction- or Air-Cooled 6U CompactPCI Module

With the 5th generation Intel® Core™ i7 Broadwell-H processor, the XCalibur4500 delivers superior performance and efficiency for today's network information processing and high performance embedded computing applications.

The XCalibur4500 leverages Intel® Iris™ Pro graphics for graphics-intensive tasks and serves as a general purpose GPU for demanding data processing applications.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050295 Category:
XCalibur4500 6U cPCI SBC

The XCalibur4500 is a high-performance 6U CompactPCI single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the 5th generation Intel® Core™ i7 Broadwell-H processor, the XCalibur4500 delivers superior performance and efficiency for today’s network information processing and high performance embedded computing applications.

The XCalibur4500 leverages Intel® Iris™ Pro graphics for graphics-intensive tasks and serves as a general-purpose GPU for demanding data processing applications.

The XCalibur4500 provides up to 16 GB DDR3L-1600 ECC SDRAM in two separate channels, two XMC/PrPMC slots, and up to 64 GB of NAND flash. The XCalibur4500 also hosts numerous I/O ports, including Gigabit Ethernet, USB, SATA, graphics, and RS-232/422/485 serial ports through the backplane connectors.

The XCalibur4500 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.

Features

  • Supports 5th generation (Broadwell-H) and 4th generation (Haswell) Intel® Core™ i7 processors
  • 6U CompactPCI module
  • Complies with PICMG 2.0, 2.1, 2.3, 2.9, 2.16
  • Conduction or air cooling
  • Up to 16 GB DDR3L-1600 ECC SDRAM in two channels
  • Up to 64 GB of NAND flash
  • Three Gigabit Ethernet ports
  • Three USB 2.0 high-speed ports
  • Four SATA ports
  • Two RS-232/422/485 serial ports
  • Two XMC/PMC interfaces
  • Two HDMI/DVI-D or Dual-Mode DisplayPort interfaces
  • Intel® vPro™/AMT support
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Technical Specs

Processor

  • 5th generation Intel® Core™ i7 (Broadwell-H)
  • 4th generation Intel® Core™ i7 (Haswell)
  • Integrated high-performance 3D graphics controller
  • Up to Intel® Iris™ Pro Graphics 6200

Memory

  • Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 64 GB of NAND flash
  • 64 MB NOR boot flash
  • 64 kB EEPROM

cPCI

  • 33/66 MHz 32-bit PCI interface to J1 and J2
  • PICMG 2.1 (Hot Swap support)
  • PICMG 2.3 (PMC I/O to P3 and P5)
  • PICMG 2.9 (dedicated IPMI controller)
  • PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)

PrPMC

  • PCI-X (32/64-bit, 66/100 MHz)
  • PCI (32/64-bit, 33/66 MHz)

XMC (VITA 42.3)

  • x8 PCI Express Gen3-capable

Front Panel I/O (Optional)

  • Dual-Mode DisplayPort interface
  • One 10/100/1000BASE-T Ethernet port
  • One USB 2.0 port
  • General-purpose LEDs

Rear Panel I/O

  • Two 10/100/1000BASE-T Ethernet ports
  • Four SATA ports capable of 3 Gb/s
  • Two USB 2.0 ports
  • HDMI/DVI-D or Dual-Mode DisplayPort interface
  • Two RS-232/422/485 serial ports
  • 3.3 V GPIO signals
  • PMC I/O

Additional Features

  • Non-volatile memory write protection
  • Optional Trusted Platform Module (TPM)
  • IEEE 1588 support on two Gigabit Ethernet ports
  • Intel® Active Management Technology (AMT) supported by Intel® vPro™ Technology

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Physical Characteristics

  • 6U CompactPCI conduction- or air-cooled form factor
  • Dimensions: 233 mm x 160 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option
  • Thermal performance will vary based on CPU frequency and application

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • XIt1009 (90060335) - 6U cPCI I/O RTM Module
  • XTend209 (90071685) - Debug Module
  • Cable (90000245) - DisplayPort to DisplayPort, M to M, 6 ft.
  • Cable (90000250) - DisplayPort to HDMI, M to M, 6 ft.
  • Cable (90000255) - DisplayPort to DVI-D, M to M, 6 ft.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Press Release

5th Gen Intel® Core™ i7 (Broadwell-H) Press Release

View Press Release

Board Support

X-ES Enterprise Linux (XEL) Board Support Package

View BSP

Datasheet

View the XCalibur4500
Datasheet PDF

Download Datasheet

6U cPCI SBCs

View the full selection of 6U cPCI SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc