XCalibur4531

5th Gen Intel® Core™ i7 Broadwell-H Processor-Based Conduction- or Air-Cooled 6U VME Single Board Computer (SBC)

With the 5th generation Intel® Core™ i7 Broadwell-H processor, the XCalibur4531 delivers enhanced performance and efficiency for today's network information processing and embedded computing applications.

The XCalibur4531 leverages Intel® Iris™ Pro graphics for graphics-intensive tasks and serves as a general purpose GPU for demanding data processing applications.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050475 Category:
XCalibur4531 6U VME SBC
XCalibur4531 6U VME Single Board Computer (SBC) Top ShotXCalibur4531 6U VME Single Board Computer (SBC) Bottom Shot

The XCalibur4531 is a high-performance 6U VME single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the 5th generation Intel® Core™ i7 Broadwell-H processor, the XCalibur4531 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.

The XCalibur4531 leverages Intel® Iris™ Pro graphics for graphics-intensive tasks and serves as a general-purpose GPU for demanding data processing applications.

The XCalibur4531 provides up to 16 GB DDR3L-1600 ECC SDRAM in two separate channels, two XMC/PrPMC slots, and up to 64 GB of NAND flash. The XCalibur4531 also hosts numerous I/O ports, including Gigabit Ethernet, USB, SATA, graphics, mezzanine I/O, and RS-232/422/485 through the backplane connectors.

The XCalibur4531 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.

Features

  • Supports 5th generation (Broadwell-H) and 4th generation (Haswell) Intel® Core™ i7 processors
  • 6U VME module
  • Conduction or air cooling
  • Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 64 GB of NAND flash
  • Four Gigabit Ethernet ports
  • Two XMC/PMC interfaces
  • Two HDMI/DVI-D or Dual-Mode DisplayPort interfaces
  • Three USB 2.0 ports
  • One SATA port
  • Two RS-232/422/485 serial ports
  • Intel® vPro™/AMT support
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks BSPs

Technical Specs

Processor

  • 5th generation Intel® Core™ i7 (Broadwell-H)
  • 4th generation Intel® Core™ i7 (Haswell)
  • Integrated high-performance 3D graphics controller
  • Up to Intel® Iris™ Pro Graphics 6200

Memory

  • Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
  • Up to 64 GB of NAND flash
  • 64 MB NOR boot flash
  • 64 kB EEPROM

VME

  • VME64 (VITA 1-1994 R2002)
  • VME64x (VITA 1.1-1997 R2003)
  • 2eSST (VITA 1.5-2003)
  • Ethernet on VME64x (VITA 31.1-2003)
  • PMC I/O on VME (VITA 35-2000)

XMC/PrPMC

  • PCI-X (64/32-bit, 100/66 MHz)
  • PCI (64/32-bit, 66/33 MHz)
  • x8 PCI Express Gen3-capable port

Front Panel I/O (Optional)

  • Dual-Mode DisplayPort interface
  • One 10/100/1000BASE-T Ethernet port
  • One USB 2.0 port
  • General-purpose LEDs

Rear Panel I/O

  • Three 10/100/1000BASE-T Ethernet ports
  • One SATA port
  • Two USB 2.0 ports
  • HDMI/DVI-D or Dual-Mode DisplayPort interface
  • Two RS-232/422/485 serial ports
  • PMC I/O

Additional Features

  • Non-volatile memory write protection
  • Optional Trusted Platform Module (TPM)
  • Optional VITA 38-2003 IPMI Controller (IPMC)
  • IEEE 1588 support on three Gigabit Ethernet ports
  • Intel® Active Management Technology (AMT) supported by Intel® vPro™ Technology

Physical Characteristics

  • 6U VME conduction- or air-cooled form factor
  • Dimensions: 233 mm x 160 mm

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows drivers
  • Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option
  • Thermal performance will vary based on CPU frequency and application

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • XIt1011 (90060370) - 6U VME Rear Transition Module with Ethernet, serial, SATA, USB, and HDMI
  • XTend209 (90071685) - Debug Module
  • Cable (90000245) - DisplayPort to DisplayPort, M to M, 6 ft.
  • Cable (90000250) - DisplayPort to HDMI, M to M, 6 ft.
  • Cable (90000255) - DisplayPort to DVI-D, M to M, 6 ft.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

VME Bridge

XCalibur4531 features a Xilinx Artix-7-based VME Bridge

View More

Press Release

5th Gen Intel® Core™ i7 (Broadwell-H) Press Release

View Press Release

Datasheet

View the XCalibur4531
Datasheet PDF

Download Datasheet

6U VME SBCs

View the full selection of 6U VME SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc