XPort1013

The XPort1013 is an intelligent communications controller targeting high-performance serial applications. The XPort1013 combines a wide array of supported serial protocols, a broad range of serial interface standards, and a flexible I/O routing structure, to pack maximum flexibility into an industry-standard PCI card.

Powered by the NXP (formerly Freescale) PowerQUICC™ II MPC8270 processor, the XPort1013 implements four serial communication ports providing an EIA-530-A-compliant signal set, supporting HDLC/SDLC, UART, transparent, and BiSync modes, with NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester encoding. Coupled with software configurable support for RS-232, RS-422, RS-423, RS-485, and MIL-STD-188-114A, the XPort1013 provides maximum flexibility for your application.

For a system designer, the XPort1013 will help drive both cost and power consumption down. Since the PCI bridge is integrated on-chip, the XPort1013 draws up to 40% less power, and costs up to 30% less than conventional designs based on other processors.

Features

• NXP (formerly Freescale) PowerQUICC™ II MPC8270 processor at up to 450 MHz with integrated PCI
• Four SCCs support broad range of serial protocols
• Software configurable serial interface modes
• Front I/O
• Up to 512 MB SDRAM
• Up to 64 MB soldered flash
• Linux BSP
• Wind River VxWorks BSP
• VxWorks, Linux, Windows, and OSE drivers

Technical Specs

Processor

• NXP (formerly Freescale) PowerQUICC™ II MPC8270 processor
• Embedded PowerPC G2 core
• 450 MHz max processor speed
• 280 Dhrystones at 200 MHz
• 66 MHz 60x bus
• 16 L1 instruction/data caches
• 32 kB internal SRAM
• Integrated MMU
• Integrated Floating-Point Unit
• Core-disabled mode

Memory

• Up to 512 MB SDRAM
• 64 MB surface-mount flash
• 2 kB SEEPROM

Serial Communication Controller

• HDLC, UART, transparent, and BiSync modes
• DPLL supporting NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester
• Independent BRGs for each SCC transceiver
• Two external custom oscillators for precision serial clocking (optional)

Serial Interface (Standard)

• Four software-configurable SCC ports supporting RS-232, RS-422, RS-423, RS-485, and MIL-STD-188-114A Type I and II balanced/unbalanced modes
• 10 Mbps max synchronous
• 4 Mbps max asynchronous
• EIA-530-A DTE/DCE software selectable

Software

• Linux BSP
• Wind River VxWorks BSP
• VxWorks, Linux, Windows, and OSE drivers

Physical Characteristics

• PCI form factor
• 4.2 in. (L) x 5.875 in. (W)
• 3.8 oz.

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
• Conformal coating available as an ordering option

Power Requirements (Typical)

• 3.3 V, 0.60 A, 1.98 W
• 5 V, 0.35 A, 1.75 W
• +12 V, 0.012 A, 0.15 W
• -12 V, 0.012 A, 0.15 W

Accessories

• Cable (90000210) - Serial, DTE, 6 ft.
• Adapter (90000010) - Serial, DCE, 6 ft.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet