XPort9100

Avionics-Level (+28 V) Eight-Channel Isolated GPIO XMC Module

The XPort9100 provides eight, independently-configurable GPIO channels, each optically isolated. Each output is open-drain and, when active, is clamped to the return line voltage. The output can support clamping a 0.3 A pull-up. Each input has a +3.5 V switching threshold.

End of Life

Please see the recommended replacement, the XPort9102 Avionics-Level-Tolerant Isolated TTL Discrete I/O XMC Module.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90015175 Category:
XPort9100 Avionics-Level GPIO XMC Module

The XPort9100 is a rugged, avionics-level GPIO XMC module.

The XPort9100 provides eight, independently-configurable GPIO channels, each optically isolated. Each output is open-drain and, when active, is clamped to the return line voltage. The output can support clamping a 0.3 A pull-up. Each input has a +3.5 V switching threshold.

The XPort9100 requires XMC VPOWER to be at +12 V. Please contact X-ES for +5 V VPOWER support.

Features

  • Avionics-Level (+28 V) GPIO
  • Conduction-cooled
  • Each GPIO is configurable as either an input or an output
  • Each I/O signal is optically isolated
  • Each input may be configured to generate an interrupt
  • Configurable weak pull-up
  • +28 V power supply is boosted from XMC VPOWER
  • The +28 V power supply provides an isolated output for each GPIO channel

Technical Specs

GPIO

  • Eight channels
  • Optically isolated
  • Configurable weak pull-up
  • Output is 0.3 A clamping to return

Back Panel I/O

  • x1 PCI Express interface out the P15 XMC connector
  • Six GPIO lines on P16
  • Two GPIO lines on P14

Software Support

  • Wind River VxWorks
  • Other OS support possible - contact X-ES

Physical Characteristics

  • XMC form factor
  • Dimensions: 144 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
  • Conformal coating available as an ordering option

Power Requirements

  • Maximum power consumption: 2 W

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

Please see the recommended replacement product, XPort9102

View Product

Datasheet

View the XPort9100
Datasheet PDF

Download Datasheet

XMC I/O Modules

View the full selection of XMC I/O Modules from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc