MIL-STD-704 28 V Input to ±12 V, 5 V, and 3.3 V Output 3U PICMG 2.11 Power Supply with Integrated MIL-STD-461E Filtering

The XPm2010 fits in a 3U cPCI slot and can provide up to a combined 300 W of total output power at maximum operating temperature. It can also be paired with another XPm2010 for load sharing.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »

Contact us directly at +1 (608) 833-1155

SKU: 90070480 Category:
XPm2010 3U cPCI Embedded Power Supply

The XPm2010 is a PICMG 2.11 power supply that takes in a MIL-STD-704 28 VDC input voltage and provides up to 300 W on 3.3 V, 5 V, and ±12 V at up to 90% efficiency. The XPm2010 also provides on-card MIL-STD-461E EMI filtering.

The XPm2010 fits in a 3U cPCI slot. Up to 8.3 A on 12 V, 2 A on -12 V, 22 A on 5 V, and 25 A on 3.3 V can be supported on each rail, separately. The XPm2010 can provide up to a combined 300 W of total output power at maximum operating temperature. The XPm2010 can also be paired with another XPm2010 for load sharing.

The XPm2010 features an optional VITA 46.11 Tier 1 and Tier 2 Intelligent Platform Management Interface (IPMI) controller which monitors board voltages and temperatures.


  • MIL-STD-704 28 VDC input voltage
  • MIL-STD-461E EMI filtering
  • PICMG 2.11 standard 47-position connector
  • Up to 300 W output on 3.3 V, 5 V, and ±12 V
  • On-card holdup capacitor for up to 60 ms (at 120 W) of holdup time (optional)
  • Up to 90% efficient
  • -40°C to 85°C conduction-cooled operating temperature (at the thermal interface)
  • Compliant to the VITA 48.2 Type 1, Two-Level Maintenance (2LM) standard
  • Load sharing support with another XPm2010
  • VITA 46.11 Tier 1 and Tier 2 IPMI controller for on-card voltage monitoring (optional)

Technical Specs

Input Power

  • MIL-STD-704 28 VDC
  • MIL-STD-461E EMI filtering

Output Power

  • Up to 90% efficient
  • Supports up to 300 W in total combined power output
  • 3.3 V at up to 25 A
  • 5 V at up to 22 A
  • 12 V at up to 8.3 A
  • -12 V at up to 2 A
  • Can be paired with another XPm2010 for load sharing


  • On-card holdup capacitor for up to 60 ms (at 120 W) of holdup time (optional)

Physical Characteristics

Contact factory for CAD model if desired

  • 3U cPCI form factor
  • PICMG 2.11 standard 47-position connector
  • 0.8 in. pitch
  • 1.45 pounds (with on-card holdup capacitor)
  • 1.1 pounds (without on-card holdup capacitor)

IPMI Controller (Optional)

  • VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
  • Monitors voltages
  • Monitors temperature sensors
  • Connects to backplane via system management bus (I²C)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
  • Conformal coating available as an ordering option


Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.



To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Product Brief

Embedded Power Supplies Product Brief

View Brief

Press Release

View the XPm2010
Press Release

View Press Release


View the XPm2010
Datasheet PDF

Download Datasheet
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2023 Extreme Engineering Solutions, Inc