The XPedite1000 is a high-performance Processor PMC (PrPMC). A PCI-X PMC interface provides the system designer with ample bandwidth for I/O intensive applications. Two front panel Ethernet ports provide a flexible I/O interface by auto-negotiating between 10, 100, and 1000 Mbps operation.
The XPedite1000 utilizes the low-power Applied Micro PowerPC 440GX embedded processor. With integrated PCI-X, DDR SDRAM, and Ethernet interfaces, the 440GX offers a highly optimized solution for packet processing and general computing applications. The serial and Gigabit Ethernet interfaces are accessible either through the front panel or P14 I/O. A SO-DIMM DDR SDRAM memory slot and socketed boot flash provide flexible field upgradeability.
The XPedite1000 is ideal for PrPMC applications requiring low cost and power yet high bandwidth and processing performance. The 440GX processor dissipates only 4.5 W while operating at 667 MHz and provides 1334 DMIPs of processing power.
Technical Specs
Processor
- Applied Micro PowerPC 440GX
- 800 MHz max processor speed
- 133 MHz PCI-X interface
- 32 kB L1 instruction/data caches
- 256 kB L2 cache/SRAM
- DDR-333 SDRAM interface
- Two Gigabit Ethernet controllers
- Two I²C controllers
Non-Volatile Storage
- Up to 144 MB surface mount flash
- 512 kB socketed flash
- 512 bytes SEEPROM
Ethernet
- Auto-negotiates between 10/100/1000 Mbps
- Front panel/rear I/O
DDR SDRAM
- SO-DIMM slot
- Up to 512 MB at up to 333 MHz
- 2.6 Gb/s peak bandwidth
Front Panel I/O
- Two Gigabit Ethernet ports
- One RS-232 serial port
- Link and activity LEDS
Rear I/O
- Two Gigabit Ethernet ports
- One RS-232 serial port
- One I²C port
RTC
- M41T00 I²C timekeeper
- 60 hour clock retention
Software
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY BSP
- LynuxWorks LynxOS BSP
- Ethernet, I²C, and RTC drivers
Physical Characteristics
- PMC form factor
- Dimensions: 149 mm x 74 mm, 10 mm stacking height
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements (Estimate)
Accessories
Please contact X-ES Sales at
sales@xes-inc.com or by phone at
+1-608-833-1155 for information on this product's accessories.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
