XPedite5000

NXP PowerQUICC™ III MPC8540 Processor-Based Dual Gigabit Ethernet XMC/PrPMC Module

The XPedite5000 is an intelligent communications controller targeting high-performance yet low-cost applications. Powered by the NXP (formerly Freescale) PowerQUICC™ III MPC8540 processor, the XPedite5000 supports two Gigabit Ethernet IEEE 802.3-compliant interfaces.

End of Life

Please see recommended replacement product, the XPedite5500 NXP (formerly Freescale) QorIQ P2020 XMC/PrPMC Mezzanine Module.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

XPedite5000 XMC/PrPMC Module

The XPedite5000 is an intelligent communications controller targeting high-performance yet low-cost applications. Powered by the NXP (formerly Freescale) PowerQUICC™ III MPC8540 processor, the XPedite5000 supports two Gigabit Ethernet IEEE 802.3-compliant interfaces. The XPedite5000 provides two UARTs and eight general-purpose pins routed to the backplane connector. Coupled with X-ES supplied software, customers can install the XPedite5000 on standard VME and cPCI platforms, or custom motherboards that support PMC sites.

With the PowerQUICC™ III’s integrated PCI-X, DDR SDRAM, and Ethernet interfaces, the PowerQUICC™ III offers a highly optimized solution for packet processing and general computing applications. The serial and Gigabit Ethernet interfaces are accessible either through the front panel or P14 I/O.

For performance systems, the XPedite5000 can be used as an XMC in which the 500 MHz, 8-bit RapidIO interface can be used in accordance with VITA 42 in parallel or in substitution of the 133 MHz, 64-bit PCI-X 1.0a, PCI 2.2-compliant interface.

Features

  • NXP PowerQUICC™ III MPC8540 processor at up to 1.0 GHz
  • 133 MHz, 64-bit PCI-X interface
  • 500 MHz, 8-bit RapidIO
  • Up to 1 GB DDR-266 SDRAM
  • Up to 32 MB soldered flash
  • Two Gigabit Ethernet interfaces
  • Two UARTs
  • Integrated Floating-Point Unit
  • 256 kB L2 cache
  • Linux BSP
  • Wind River VxWorks BSP

Technical Specs

Processor

  • NXP (formerly Freescale) PowerQUICC™ III MPC8540
  • 1 GHz max processor speed
  • 1850 Dhrystones at 800 MHz
  • 32 kB L1 instruction/data caches
  • 256 kB L2 cache
  • Integrated Floating-Point Unit
  • Integrated MMU
  • 333 MHz DDR SDRAM interface
  • 500 MHz, 8-bit RapidIO
  • 133 MHz PCI-X interface
  • Two Gigabit Ethernet controllers
  • Two serial controllers
  • Two I²C controllers
  • 32 kB internal SRAM

Memory

  • Up to 32 MB surface mount flash
  • 2 kB SEEPROM

XMC

  • 500 MHz, 8-bit RapidIO
  • IPMI support
  • GPIO on user data

Front Panel I/O

  • Two Gigabit Ethernet ports
  • One RS-232 serial port
  • Link and activity LED

Rear I/O

  • Two Gigabit Ethernet ports
  • Four GPIO pins
  • Two RS-232 serial ports

RTC

  • M41T00 I²C timekeeper
  • 60 hour clock retention

Software

  • Linux BSP
  • Wind River VxWorks BSP
  • Ethernet drivers

Physical Characteristics

  • PMC form factor
  • Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Power Requirements (Estimate)

  • 3.3 V, 4.05 A, 13.35 W

Accessories

  • Adapter (90000050) - Serial, RJ-45 to DB-9
  • XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

View the recommended replacement product, XPedite5500

View Product

Datasheet

View the XPedite5000
Datasheet PDF
 

Download Datasheet

XMC/PMC Mezzanines

View the full selection of
XMC/PMC Mezzanines
from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc