XPand1004

Two-Slot 3U VPX Development Platform for Conduction-Cooled Modules with RTM I/O

The XPand1004 system is a low-cost development platform for conduction-cooled 3U VPX cards. It supports up to two 0.8 in. or 1.0 in. 3U VPX boards, and utilizes RTMs to simplify I/O access and support rapid system prototyping. Power and reset LEDs are provided for system status.

Not Recommended for New Designs

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
XPand1004 Two-Slot 3U VPX Development Platform

The XPand1004 system is a low-cost development platform forconduction-cooled 3U VPX cards. It supports up to two 0.8 in. or 1.0 in. 3U VPX boards and utilizes RTMs to simplify I/O access andsupport rapid system prototyping. The XPand1004 can be configured as two I/O isolated slots, with all I/O from the payload passed to the RTM.

Optionally, the XPand1004 can be configured with Dual Fat Pipe (DFP) J1 interconnects, with the remaining I/O from the payload passed to the RTM. Power and reset LEDs are provided for system status. A momentary push button is provided for reset, and a switch is provided for DC power enable. Power can be provided via an ATX power supply or via the 3U VPX VITA 62 power supply slot.

The XPand1004 dissipates heat from the conduction-cooled modules tosidewall heat exchangers, where it is quietly dissipated to the ambientenvironment by forced-air cooling.

The XPand1004 is currently available for purchase in several rapid-development standard configurations. Custom configurations of modules, RTMs, and backplanes are also available utilizing X-ES and third-party components.

Features

  • Development platform for two conduction-cooled 3U VPX modules
  • Compatible with multiple OpenVPX™ profiles
  • Utilizes Rear Transition Modules (RTMs) for I/O access
  • Forced-air-cooled sidewall heat exchangers
  • Supports 0.8 in. or 1.0 in. pitch conduction-cooled VPX modules
  • Supports VITA 48.2 REDI
  • Standard VPX configurations in stock
  • Options for Dual Fat Pipe (DFP) J1 interconnects or J1 I/O slot isolation with full I/O pass-through to RTM slots
  • Customizable with X-ES and third-party components
  • Power and reset switches
  • Power and reset LEDs
  • Designed for lab use up to 30°C ambient
  • Input power is factory- configurable via an ATX supply or a VITA 62 power slot

Technical Specs

VPX Slot Features

  • Two 3U VPX-REDI (VITA 48.2) 0.8 in. or 1.0 in. pitch slots
  • Two 3U VPX (VITA 46.10) RTM slots
  • One 3U VPX VITA 62 power supply slot (optional)
  • Options for Dual Fat Pipe (DFP) J1 interconnects or J1 I/O slot isolation with full I/O pass-through to RTM slots
  • Configurable P0 I/O (NVMRO, geographical addresses, SYSCON) via DIP switches

Power

  • ATX or VITA 62 power slot configurations available
  • Per-slot voltage monitoring via I²C Analog to Digital Converters (ADCs) and test loops
  • Per-slot current monitoring via I²C Analog to Digital Converters (ADCs) and test loops

Physical Characteristics

  • Dimensions: 11.9 in. (L) x 5.6 in. (W) x 9.3 in. (H)
  • 10 lbs. with backplane

Accessories

  • ATX Power Supply (70003134)
  • XPm9001 (90071735) - Power Supply for XPand1004

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XPand1004 Two-Slot 3U VPX Development Platform
XPand1004 — 3U VPX Development System

Information Request

Additional Information

Datasheet
 

View the XPand1004
Datasheet PDF
 

Download Datasheet

VPX Development Systems

View the full selection of
VPX Development Systems
from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc