XPand1201

3U CompactPCI Development Platform for Up to Eight Conduction-Cooled Modules

The XPand1201 is a low-cost, flexible, development platform. This platform supports up to eight 0.8 in. or 1.0 in. pitch conduction-cooled CompactPCI modules.

It provides 550 W of total simultaneous power, which can be distributed as up to 8 A on 12 V, up to 80 A on 5 V, and up to 40 A on 3.3 V.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
XPand1201 3U cPCI Development Platform

The XPand1201 is a low-cost, flexible, development platform. This platform supports up to eight 0.8 in. or 1.0 in. pitch conduction-cooled CompactPCI modules. It provides 550 W of total simultaneous power, which can be distributed as up to 8 A on 12 V, up to 80 A on 5 V, and up to 40 A on 3.3 V.

The heat from the internal conduction-cooled modules is conducted to sidewall exchangers, where it is dissipated to the ambient environment by forced-air cooling. This efficient thermal design allows up to 60 W of power dissipation per slot at 30°C ambient,while maintaining 70°C at the module’s thermal interface.

X-ES platforms, including the XPand1201, provide a feature-rich solution for system development. Rear Transition Modules (RTMs) provide maximum I/O flexibility and rapid system prototyping. Power and reset LEDs are provided for system status. A momentary push-button is provided for reset, and a switch is provided for DC power enable.

The XPand1201 is available for purchase in several rapid-development, standard configurations. Custom configurations of modules, RTMs, and backplanes are also available utilizing X-ES and third party components.

Features

  • Development platform for conduction-cooled modules
  • Forced-air-cooled sidewall heat exchangers
  • Supports eight 0.8 in. or 1.0 in. pitch conduction-cooled cPCI modules
  • Standard CompactPCI configurations available
  • PICMG CompactPCI standards-based
  • Customizable with X-ES and third party components
  • Rear Transition Module (RTM) support for maximum I/O flexibility
  • Front panel power and reset switches
  • Front panel power and reset LEDs
  • Up to 550 W of total simultaneous power
  • Up to 60 W per slot at 30°C ambient and 70°C rail
  • Two VITA 62 power slots
  • 12 V up to 8 A
  • 5 V up to 80 A
  • 3.3 V up to 40 A
  • 110-240 VAC, 50/60 Hz power input

Technical Specs

Form Factor

  • 3U CompactPCI 0.8 in. or 1.0 in. pitch
  • 3U CompactPCI RTM

Slots

  • Eight 0.8 in. or 1.0 in. pitch RTM slots
  • Eight 0.8 in. or 1.0 in. pitch payload slots
  • Two 0.8 in. or 1.0 in. pitch power slots

Power

  • 110-240 VAC, 50/60 Hz power input
  • 550 W total simultaneous power
  • Up to 8 A on 12 V
  • Up to 80 A on 5 V
  • Up to 40 A on 3.3 V
  • Up to 3 A on -12 V
  • Up to 12 A on 3.3 V_AUX
  • Up to 32 A on PCI_VIO

Cooling

  • Up to 60 W per slot at 30°C ambient and 70°C rail

Physical Characteristics

  • Dimensions: 11.5 in. (L) x 5.5 in. (W) x 16.5 in. (H)
  • 20 lbs. with backplane and power supply

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1 (608) 833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XPand1201 3U cPCI Development Platform
XPand1201 —3U CompactPCI Development System

Information Request

Additional Information

Datasheet
 

View the XPand1201
Datasheet PDF
 

Download Datasheet

Press Release
 

View the XPand1201
Press Release
 

View Press Release

cPCI Development Systems

View the full selection of
cPCI Development Systems
from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc