XPand1301

3U CompactPCI Development Platform for Up to Eight Air-Cooled Modules

This platform supports up to eight 0.8 in. or 1.0 in. pitch air-cooled CompactPCI modules.

It provides 550 W of total simultaneous power, which can be distributed as up to 8 A on 12 V, up to 80 A on 5 V, and up to 40 A on 3.3 V. The XPand1301 can provide up to 20 CFM of airflow per slot.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

XPand1301 3U cPCI Development Platform

The XPand1301 is a low-cost, flexible, development platform. This platform supports up to eight 0.8 in. or 1.0 in. pitch air-cooled CompactPCI modules. It provides 550 W of total simultaneous power, which can be distributed as up to 8 A on 12 V, up to 80 A on 5 V, and up to 40 A on 3.3 V. The XPand1301 can provide up to 20 CFM of airflow per slot.

X-ES platforms, including the XPand1301, are a feature-rich solution for system development. Rear Transition Modules (RTMs) provide maximum I/O flexibility and rapid system prototyping. Power and reset LEDs indicate system status. The XPand1301 also features a momentary push-button for reset, as well as a switch to enable DC power.

The XPand1301 is available for purchase in several rapid-development, standard configurations. Custom configurations of modules, RTMs, and backplanes are also available utilizing X-ES and third party components.

Features

  • Development platform for air-cooled modules
  • Supports eight 0.8 in. or 1.0 in. pitch air-cooled cPCI modules
  • Standard CompactPCI configurations available
  • PICMG CompactPCI standards-based
  • Customizable with X-ES and third-party components
  • Rear Transition Module (RTM) support for maximum I/O flexibility
  • Removable side panels for debug access
  • Up to 20 CFM of airflow per slot
  • Front panel power and reset switches
  • Front panel power and reset LEDs
  • Up to 550 W of total simultaneous power
  • Up to 60 W per slot at 30°C ambient
  • Two VITA 62 power slots
  • 12 V up to 8 A
  • 5 V up to 80 A
  • 3.3 V up to 40 A
  • 110-240 VAC, 50/60 Hz power input

Technical Specs

Form Factor

  • 3U CompactPCI 0.8 in. or 1.0 in. pitch
  • 3U CompactPCI RTM

Slots

  • Eight 0.8 in. or 1.0 in. pitch RTM slots
  • Eight 0.8 in. or 1.0 in. pitch payload slots
  • Two 0.8 in. or 1.0 in. pitch power slots

Power

  • 110-240 VAC, 50/60 Hz power input
  • 550 W total simultaneous power
  • Up to 8 A on 12 V
  • Up to 80 A on 5 V
  • Up to 40 A on 3.3 V
  • Up to 3 A on -12 V
  • Up to 12 A on 3.3 V_AUX
  • Up to 32 A on PCI_VIO

Cooling

  • Up to 20 CFM per slot
  • Standard configuration of 10 CFM per slot
  • Removable chassis side panels

Physical Characteristics

  • Dimensions: 11.6 in. (L) x 13.5 in. (W) x 13.5 in. (H)
  • 19 lbs. with backplane and power supply

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet
 

View the XPand1301
Datasheet PDF
 

Download Datasheet

cPCI Development Systems

View the full selection of
cPCI Development Systems
from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc