XPedite4002

The XPedite4002 is a high-performance Processor PMC (PrPMC) module. A PCI-X PMC interface provides the system designer with ample bandwidth for I/O-intensive applications. Two front panel Ethernet ports provide a flexible I/O interface by auto-negotiating between 10, 100, and 1000 Mbps operation.

The XPedite4002 utilizes the IBM PowerPC 750GX embedded processor and Marvell Discovery III system controller. With integrated PCI-X, DDR SDRAM, and Ethernet interfaces, the XPedite4002 offers a highly-optimized solution for packet processing and general computing applications. A serial and 10/100/1000BASE-T Ethernet interface are accessible through the front panel. One or two 10/100/1000BASE-T Ethernet interfaces, two serial interfaces, and two GPIO pins are accessible through P14 I/O. The XPedite4002 is available in both 10 mm and 15 mm stacking heights.

The XPedite4002 is ideal for PrPMC applications requiring low cost and power yet high bandwidth and processing performance. The 750GX processor, while operating at 1 GHz, provides 2320 DMIPs of processing power.

Features

• IBM PowerPC 750GX processor at up to 1 GHz
• 133 MHz PCI-X PrPMC and local bus interfaces
• Up to 1 GB, DDR-400 SDRAM
• Up to 128 MB soldered NOR flash
• PTMC Configuration 5 P14 Ethernet
• Two 10/100/1000BASE-T Ethernet ports
• Front panel/rear I/O
• Integrated 1 MB L2 cache
• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP

Technical Specs

Processor

• IBM PowerPC 750GX
• 1 GHz max processor speed
• 200 MHz 60x bus
• 32 kB L1 instruction/data caches
• 1 MB L2 cache

Non-Volatile Storage

• Up to 128 MB surface mount flash
• 512-bytes SEEPROM

Ethernet

• Two Ethernet controllers
• Auto-negotiates between 10/100/1000 Mbps
• Front panel/rear I/O

DDR SDRAM

• Up to 1 GB at DDR-400

Front Panel I/O (Optional)

• One 10/100/1000BASE-T Ethernet port
• One RS-232 serial port
• Link and activity LEDS

Rear I/O

• PTMC Configuration 5 pinout
• One or two 10/100/1000BASE-T Ethernet ports
• Two GPIO pins
• Two RS-232 serial ports

RTC

• M41T00 I²C timekeeper
• 60 hour clock retention

Software

• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• OSE BSP

Physical Characteristics

• PMC form factor
• Dimensions: 149 mm x 74 mm, 10 or 15 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
• Conformal coating available as an ordering option

Power Requirements (Estimate)

• 3.3 V, 6 A, 19.8 W

Accessories

• XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable
• Adapter (70003555) - Serial, Mini-USB to DB-9 (Female)

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet