XPedite7332

Intel® Core™ i7 Processor-Based Conduction- or Air-Cooled 3U CompactPCI Single Board Computer (SBC)

With dual cores operating at 2.53, 2.0, or 1.06 GHz, the Intel® Core™ i7 delivers enhanced performance and efficiency for today's network information processing and other embedded computing applications.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90030230 Category:
XPedite7332 3U cPCI SBC

The XPedite7332 is a conduction- or air-cooled 3U CompactPCI (cPCI) single board computer based on the Intel® Core™ i7 processor and Intel® QM57 chipset. With dual cores operating at 2.53, 2.0, or 1.06 GHz, the Intel® Core™ i7 delivers enhanced performance and efficiency for today’s network information processing and other embedded computing applications.

Complementing processor performance, the XPedite7332 features up to 8 GB of DDR3-1066 ECC SDRAM in two channels, XMC support, and up to 16 GB of NAND flash. Two Gigabit Ethernet ports are routed to J2 for additional system flexibility.

The XPedite7332 provides a high-performance, feature-rich solution for current and future generations of embedded applications. Operating system support packages for the XPedite7332 include Wind River VxWorks, QNX Neutrino, Green Hills INTEGRITY, and Linux.

Features

  • Intel® Core™ i7-610E, -620LE, and -620UE processors
  • Dual-core with Hyper-Threading Technology
  • 3U CompactPCI module
  • Conduction or air cooling
  • Up to 8 GB of DDR3-1066 ECC SDRAM in two channels
  • 32 MB NOR boot flash
  • Up to 16 GB of NAND flash
  • Configurable as system controller or peripheral
  • Hosts an XMC
  • Two 10/100/1000BASE-T Ethernet ports out J2
  • Two RS-232/422/485 serial ports out J2
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • Microsoft Windows drivers

Technical Specs

Processor

  • Intel® Core™ i7 processor operating at 2.53, 2.0, or 1.06 GHz
  • Dual-core with Hyper-Threading Technology
  • Intel® QM57 chipset
  • Dual channel integrated memory controller
  • Integrated graphics controller
  • 4 MB of shared cache

Memory

  • Up to 8 GB of DDR3-1066 ECC SDRAM in two channels
  • 32 MB NOR boot flash
  • Up to 16 GB of NAND flash

J1 cPCI Interface

  • 32-bit PCI interface operating at 33 or 66 MHz
  • System controller capable with onboard clocking and arbitration
  • Peripheral slot capable

J2 cPCI Interface

  • Two 10/100/1000BASE-T Ethernet ports
  • Two RS-232/422/485 serial ports
  • Four GPIO signals
  • Four SATA ports
  • Two USB 2.0 ports
  • One DVI port

XMC Site

There are restrictions on the XMC front panel. Contact factory for details.

  • x8 PCIe port (XMC interface)
  • Two SATA ports

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • Microsoft Windows drivers

Physical Characteristics

  • Conduction- or air-cooled 3U CompactPCI form factor
  • Dimensions: 100 mm x 160 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XPedite7332
Datasheet PDF

Download Datasheet

3U cPCI SBCs

View the full selection of 3U cPCI SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc