XIt3015

3U VPX Rear Transition Module with 2.5 Gigabit and 1 Gigabit Ethernet and Serial

The XIt3015 provides I/O expansion for the XChange6300 XMC/PMC-based Embedded Services Router (ESR) with Marvell® ARMADA® 88F7040 ARM-based processor. Its elongated design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10 RTMs.

The XIt3015 features one SFP+ connector for a 2500BASE-X Ethernet port, plus two additional SFP+ connectors for 1000BASE-X Ethernet ports. Two RJ-45 connectors support a pair of 10/100/1000BASE-T Ethernet ports. The XIt3015 also supports an RS-232/422/485 serial port.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90040105 Categories: ,
XIt3015 3U VPX RTM

The XIt3015 provides I/O expansion for the XChange6300 XMC/PMC-based Embedded Services Router (ESR) with Marvell® ARMADA® 88F7040 ARM-based processor. Its elongated design fits in VITA 46.10 RTM slots and allows for convenient access to more I/O connectors than standard VITA 46.10 RTMs.

The XIt3015 features one SFP+ connector for a 2500BASE-X Ethernet port, plus two additional SFP+ connectors for 1000BASE-X Ethernet ports. Two RJ-45 connectors support a pair of 10/100/1000BASE-T Ethernet ports. The XIt3015 also supports an RS-232/422/485 serial port.

Features

  • 3U VPX Rear Transition Module
  • One SFP+ connector for one 2500BASE-X Ethernet port
  • Two SFP+ connectors for two 1000BASE-X Ethernet ports
  • One micro-DB-9 connector for one RS-232/422/485 serial port
  • Two RJ-45 connectors for two 10/100/1000BASE-T Ethernet ports
  • ScanWorks and processor JTAG debug headers
  • Fits in VITA 46.10 RTM slots
  • 1.0 in. pitch

Technical Specs

Back Panel I/O

  • One SFP+ connector for one 2500BASE-X Ethernet port
  • Two SFP+ connectors for two 1000BASE-X Ethernet ports
  • One micro-DB-9 connector for one RS-232/422/485 serial port
  • Two RJ-45 connectors for two 10/100/1000BASE-T Ethernet ports

Internal I/O

  • ScanWorks and processor JTAG debug headers

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Physical Characteristics

  • 3U VPX RTM form factor
  • Fits in VITA 46.10 RTM slots
  • Overall dimensions: TBD
  • 1.0 in. pitch

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XIt3015
Datasheet PDF

Download Datasheet

3U VPX RTMs

View the full selection of 3U VPX RTMs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc