X-ES Unveils XPand6212 & XPand6211 Rugged Embedded Systems Offering Unparalleled, High-Performance Networking & Communications

Introducing our Most Powerful, Small Form Factor Chassis, Ever.

The XPand6212 and XPand6211, a pair of Small Form Factor (SFF), COTS, rugged embedded systems, are now available from Extreme Engineering Solutions (X-ES).

With their high-performance networking and communications capabilities and lightweight, SWaP-optimized design, these systems are ideal for deployed applications where connectivity is key to mission success.

XPand6212 is designed to maximize processing performance and signals intelligence with its XPedite7670 Intel® Xeon® D Single Board Computer. XPand6211 is configured for high-performance networking with a 24-port Gigabit Ethernet switch, an integrated XPedite5205 XMC/PMC Embedded Services Router (ESR) running Cisco IOS® software to support secure, mission-critical communications.

Both systems are qualified to the rigorous MIL-STD-810 and DO-160 standards and purpose-built to withstand punishing environmental conditions in a range of military and industrial applications.

View XPand6212 View XPand6211

XPand6212 XPand6211 Rugged Embedded Systems

Integrated Embedded Services Router

Secure, High-Performance
Communications

Both the XPand6211 and XPand6212 support mission-critical communications with an integrated XPedite5205 XMC/PMC Embedded Services Router (ESR). The XPedite5205 runs Cisco IOS® software with Cisco Mobile Ready Net capabilities, providing highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links.

System integrators can combine the XPedite5205 with UHF, VHF, Wi-Fi, and other radio platforms to create mobile ad hoc networks (MANETs) without needing a connection to central infrastructure for military and emergency response.

The XPedite5205 is certified to NIST FIPS 140-2 Overall Level 1 (certificate #2242) and NIAP Common Criteria (CC) validated.

Rugged, Embedded Hardware
for a Modern Defense

XPand6212 XPand6211 Rugged Embedded System

  XPand6212 XPand6211
Form Factor 3U VPX, XMC, PMC 3U VPX, XMC, PMC
Chassis Type Sub-½ ATR Sub-½ ATR
Size 9.64″L x 4.88″W x 3.97″H 9.64″L x 4.88″W x 3.97″H
Weight 7.25 lbs 7.5 lbs
Ethernet 16 10/100/1000BASE-T 25 10/100/1000BASE-T
USB 1 USB 2.0 1 USB 2.0
Serial 3 RS-232 4 RS-232
Slot 1 XPedite7670 Intel® Xeon® D 3U VPX SBC XChange3013 3U VPX switch hosting XPedite8103 XMC processor module
Slot 2 XChange3013 3U VPX switch hosting XPedite5205 XMC/PMC Cisco IOS® Router XChange3013 3U VPX switch hosting XPedite5205 XMC/PMC Cisco IOS® Router
  View XPand6212 View XPand6211

Unboxing the XPand6212

Intel® Xeon® D-1500 Family Processor-Based Rugged Small Form Factor (SFF) COTS System with 14-Port Gigabit Ethernet Switch & Router with Cisco IOS®

XPedite7670 3U VPX Single Board Computer

Slot 1 | XPedite7670

3U VPX Single Board Computer

The XPedite7670 is a high-performance, 3U VPX-REDI, ruggedized, single board computer based on the Xeon® D processor.

The Intel® Xeon® D processor can provide up to 16 Xeon®-class cores in a single, power-efficient System-on-Chip (SoC) package with native extended temperature support for up to 12 core count SKUs.

View XPedite7670

XChange3013 3U VPX Ethernet Switch

Slot 2 | XChange3013

3U VPX Ethernet Switch

The XChange3013 provides fourteen backplane 10/100/1000BASE-T Ethernet ports and six backplane network 1000BASE-X Ethernet ports.

The XChange3013 delivers full wire-speed across all of its ports and supports jumbo packets up to 12 kB. It also supports IPv6, Energy Efficient Ethernet™ (EEE), and a comprehensive set of IETF RFCs and IEEE protocols.

View XChange3013

XPedite5205 XMC/PMC Embedded Services Router (ESR)

Slot 2 | XPedite5205

XMC/PMC Embedded Router

The XPedite5205 XMC/PMC-based Embedded Services Router (ESR) router runs Cisco IOS® Software with Cisco Mobile Ready Net capabilities, providing highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links.

This high-performance router is suitable for the most Size, Weight, and Power (SWaP)-constrained applications.

View XPedite5205

Unboxing the XPand6211

Rugged Small Form Factor (SFF) COTS 24-Port Gigabit Ethernet Switch, Router with Cisco IOS®, and General-Purpose Processor Module

XChange3013 3U VPX Ethernet Switch

Slot 1 & 2 | XChange3013

3U VPX Ethernet Switch

The XChange3013 provides fourteen backplane 10/100/1000BASE-T Ethernet ports and six backplane network 1000BASE-X Ethernet ports.

The XChange3013 delivers full wire-speed across all of its ports and supports jumbo packets up to 12 kB. It also supports IPv6, Energy Efficient Ethernet™ (EEE), and a comprehensive set of IETF RFCs and IEEE protocols.

View XChange3013

XPedite8103 XMC Processor Mezzanine Module

Slot 1 | XPedite8103

XMC Mezzanine Module

The XPedite8103 is an Intel® Atom™ E3800-based XMC module whose processor provides excellent computational performance and I/O functionality for its power profile and size.

Along with best-in-class performance-per-watt, the E3800 family supports extremely low operating temperatures, and its power-efficient 22 nm technology enables operation in the most demanding high-temperature environments.

View XPedite8103

XPedite5205 XMC/PMC Embedded Services Router (ESR)

Slot 2 | XPedite5205

XMC/PMC Embedded Router

The XPedite5205 XMC/PMC-based Embedded Services Router (ESR) router runs Cisco IOS® Software with Cisco Mobile Ready Net capabilities, providing highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links.

This high-performance router is suitable for the most Size, Weight, and Power (SWaP)-constrained applications.

View XPedite5205

Want to learn more about our high-performance, deployable, embedded systems?

Contact X-ES
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc