XPort3200

The XPort3200 is a rugged, IEEE 1588v2 Precision Time Protocol (PTP) ordinary clock with grandmaster capabilities. Hardware options range from commercial/air-cooled to full-military conduction-cooled solutions.

The XPort3200 is capable of providing nanosecond-level time and frequency synchronization for Ethernet networks. Support for multicast and optional unicast packets, along with grandmaster and slave operation, provide a complete IEEE 1588v2 solution.

1 PPS and input clock synchronization, as well as configurable clock and 1 PPS outputs, allow for synchronizing the grandmaster to an external time reference or providing a frequency reference to an external device.

Features

• Freescale QorIQ P1020 processor with dual PowerPC e500v2 cores at 800 MHz
• Conduction or air cooling
• Extended shock and vibration tolerance
• 1 GB of DDR3-667 ECC SDRAM
• x4 PCI Express or serial RapidIO interface to P15
• PCI PrPMC interface
• Two Gigabit Ethernet ports to P14 or P16
• Two RS-232/422/485 serial ports to P14 or P16
• One USB 2.0 port
• 256 MB of NOR flash (with redundancy)
• 16 GB of NAND flash
• IEEE 1588v2 ordinary clock
• IEEE 1588v2 boundary clock
• 1 PPS and configurable frequency output
• 1 PPS and reference frequency input (optional)
• High-precision oven-controlled oscillator (OCXO)
• GPS support (optional)
• Linux BSP

Technical Specs

Processor

• Freescale QorIQ P1020 processor
• Dual PowerPC e500v2 cores at 800 MHz
• 256 kB of shared L2 cache

IEEE 1588v2

• Ordinary clock support
• Boundary clock support
• Grandmaster support
• Multicast synchronization support
• Unicast synchronization support (optional)
• Nanosecond-level resolution
• Oncard GPS time synchronization (optional)

Memory

• 1 GB of DDR3-667 SDRAM
• 256 MB of NOR flash (with redundancy)
• 16 GB of NAND flash

Synchronous Ethernet

• Support for distributing clock over Ethernet
• Support for recovering Ethernet clock connection

PrPMC Interface

• 66/33 MHz PCI
• 32-bit bus interface

P15 XMC Interface

• x4 configurable PCI Express or Serial RapidIO

P14/P16 XMC/PMC Interface

• Two Gigabit Ethernet ports
• Two RS-232/422/485 ports
• 3.3 V GPIO
• One USB 2.0 port
• 1 PPS and reference frequency input (optional)
• 1 PPS and configurable clock output

Software Support

• Linux BSP

Physical Characteristics

• Conduction- or air-cooled XMC/PMC form factor
• Dimensions: 143.75 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements

• Power will vary based on configuration and usage. Please consult factory.

Accessories

• XIt2040 (90060070) - PIM with Gigabit Ethernet and Serial
• XIt2045 (90071175) - PIM with Ethernet and Serial
• XIt2049 (90072860) - PIM with Ethernet, Serial, PPS and Frequency In/Out
• XTend214 (90071725) - Debug Module/Cable with JTAG/COP/Serial/Ethernet/USB
• XTend3100 (90050115) - Dual XMC/PrPMC Carrier for Development and Testing

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet