XCalibur1003

IBM 750GX Processor-Based Air-Cooled 6U cPCI Single Board Computer with Marvell Discovery III Bridge

The XCalibur1003 provides a highly-configurable processing platform. Its DDR-400 SDRAM provides up to 1 GB of local memory. An optional CompactFlash interface accepts up to 1 GB of non-volatile memory. Two PCI-X PrPMC slots are available for high bandwidth I/O.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050090 Category:
XCalibur1003 6U cPCI SBC

The XCalibur1003 is a 6U CompactPCI single board computer with a PICMG 2.16 Gigabit Ethernet backplane interface and a 1.0 GHz IBM PowerPC 750GX Processor. It is well-suited for telecom, industrial, and general computing applications. The XCalibur1003 is pinout-compatible with the discontinued Force cPCI-680 and cPCI-690 boards, which makes it an excellent replacement for these products.

The XCalibur1003 provides a highly-configurable processing platform. Its DDR-400 SDRAM provides up to 1 GB of local memory. An optional CompactFlash interface accepts up to 1 GB of non-volatile memory. Two PCI-X PrPMC slots are available for high bandwidth I/O.

Hot Swap support allows the XCalibur1003 to be installed into a live system without disrupting CompactPCI bus activity. In addition, system management bus support allows the card to be powered down and reset remotely through the IPMI interface.

For the system designer, the XCalibur1003 provides a feature-rich solution to support the next generation of embedded applications.

Features

  • IBM 750GX PowerPC 1.0 GHz processor
  • Dual PCI-X PrPMC slots
  • Hot Swap support
  • Up to 1 GB DDR-400 SDRAM
  • Up to 144 MB soldered NOR flash
  • CompactFlash socket
  • Front panel serial port
  • Three front panel 10/100/1000 Gigabit Ethernet ports
  • Complies to PICMG 2.0, 2.1, 2.3, 2.9, and 2.16
  • J3/J5 pinout compatible with Force cPCI-680/690 SBCs
  • Wind River VxWorks BSP
  • Linux BSP
  • OSE BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Technical Specs

Processor

  • IBM PowerPC 750GX processor
  • 1.0 GHz max processor speed
  • 200 MHz 60x bus speed
  • 32 kB L1 instruction/data caches
  • 1 MB L2 cache

Memory

  • Up to 1 GB DDR-400 SDRAM
  • Up to 144 MB soldered NOR flash
  • 512 kB socketed flash
  • 32 kB FRAM

Ethernet

  • Three 10/100/1000 Gigabit Ethernet ports

cPCI

  • Operates in system or peripheral slot (jumper selectable)
  • PICMG 2.1 (Hot Swap support)
  • PICMG 2.3 (routes PMC I/O to P3 and P5)
  • PICMG 2.9 (dedicated IPMI controller)
  • PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)

PCI-X PMC Slots

  • Processor PMC (PrPMC) support
  • 10 mm stacking height

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • OSE BSP
  • QNX Neutrino BSP
  • Greens Hills INTEGRITY BSP

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Power Requirements

  • 3.3 V, 3.03 A, 10 W
  • 5 V, 3 A, 15 W

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XCalibur1003
Datasheet PDF

Download Datasheet

6U cPCI SBCs

View the full selection of 6U cPCI SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc