XCalibur1541

NXP (formerly Freescale) PowerQUICC™ III MPC8572E Conduction- or Air-Cooled 6U VPX Single Board Computer (SBC)

The XCalibur1541 provides two separate channels of up to 4 GB DDR2-800 ECC SDRAM, two XMC/PrPMC slots, as well as 256 MB of NOR flash (with redundancy). The XCalibur1541 also supports four Gigabit Ethernet ports, XMC I/O, PMC I/O, and RS-232/422/485 serial ports out the front panel and/or VPX backplane connectors.

End of Life

Please see recommended replacement product, the XCalibur1740 Freescale QorIQ P2020 6U VPX SBC.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050155 Category:
XCalibur1541 6U VPX SBC

The XCalibur1541 is a high-performance 6U VPX single board, multiprocessing computer that is ideal for ruggedized systems requiring high bandwidth processing and low power consumption. With dual Power Architecture® e500 cores running at up to 1.5 GHz, the NXP (formerly Freescale) MPC8572E delivers enhanced performance and efficiency for today’s embedded computing applications.

The XCalibur1541 provides two separate channels of up to 4 GB DDR2-800 ECC SDRAM, two XMC/PrPMC slots, as well as 256 MB of NOR flash (with redundancy). The XCalibur1541 also supports four Gigabit Ethernet ports, XMC I/O, PMC I/O, and RS-232/422/485 serial ports out the front panel and/or VPX backplane connectors.

The XCalibur1541 is a powerful, feature-rich solution for the next generation of compute intensive embedded applications. Operating system support for Wind River VxWorks, Microsoft Windows, QNX Neutrino, and Linux is available.

Features

  • NXP PowerQUICC™ III MPC8572E processor with dual Power Architecture® e500 cores at up to 1.5 GHz
  • 6U VPX module
  • Conduction or air cooling
  • Up to 4 GB DDR2-800 ECC SDRAM in two channels
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 16 GB of NAND flash
  • Four Gigabit Ethernet ports
  • x8 PCI Express lanes from switch to CPU, J15, and J25
  • Four x4 (x16 total) PCI Express lanes from switch to P1
  • Four SATA ports
  • Three USB 2.0 ports
  • Two RS-232/422/485 serial ports
  • Two XMC/PrPMC interfaces
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Technical Specs

Processor

  • NXP (formerly Freescale) PowerQUICC™ III MPC8572E processor
  • Dual Power Architecture® e500 cores at up to 1.5 GHz
  • 1 MB of shared L2 cache

Memory

  • Up to 4 GB of DDR2 ECC SDRAM in two channels
  • Up to 16 GB of NAND flash
  • Up to 256 MB of NOR flash (with redundancy)
  • 16 kB I²C EEPROM

PrPMC

  • PCI-X (64/32-bit, 100/66 MHz)
  • PCI (64/32-bit, 66/33 MHz)

XMC

  • x8 PCIe port to J15 and J25

VPX

  • VITA 46.0
  • VITA 46.4 (four x4 PCIe lanes to P1)
  • VITA 46.7 (four 1000BASE-BX Ethernet ports to P4)
  • VITA 46.9 (XMC and PMC I/O to P3, P4, P5, P6, mapping P3w1P4-P64s+X12d+X8d)

IPMI

  • Onboard management controller

Software

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Greens Hills INTEGRITY BSP

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • Cable (90000075) - Serial, Micro D to DB-9, F to M, 3 ft.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

View the recommended replacement product, XCalibur1740

View Product

Datasheet

View the XCalibur1541
Datasheet PDF
 

Download Datasheet

6U VPX SBCs

View the full selection of 6U VPX SBCs from X-ES
 

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc