XCalibur1740

NXP (formerly Freescale) QorIQ P2020 Processor-Based Conduction- or Air-Cooled 6U VPX Module

The XCalibur1740 is a high-performance, multiprocessing, 6U VPX, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption.

With dual Power Architecture® e500v2 cores running at up to 1.2 GHz, the P2020 processor delivers enhanced performance and efficiency for today's embedded computing applications.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050260 Category:
XCalibur1740 6U VPX SBC

The XCalibur1740 is a high-performance, multiprocessing, 6U VPX, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With dual Power Architecture® e500v2 cores running at up to 1.2 GHz, the NXP (formerly Freescale) QorIQ P2020 delivers enhanced performance and efficiency for today’s embedded computing applications.

The XCalibur1740 provides up to 8 GB of DDR3 ECC SDRAM, two XMC/PMC slots, and 512 MB of NOR flash (with redundancy). The XCalibur1740 also supports three Gigabit Ethernet ports, XMC I/O, PMC I/O, and two RS-232/422/485 serial ports out the front panel and/or VPX backplane connectors.

The XCalibur1740 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. For customers seeking a lower power option, the XCalibur1740 can be designed with the NXP P1020 processor, offering a reduction of approximately 7 W. Operating system support for Wind River VxWorks, Green Hills INTEGRITY-178, QNX Neutrino, and Linux is available.

Features

  • NXP QorIQ P2020 processor with dual Power Architecture® e500v2 cores at up to 1.2 GHz
  • Alternate NXP QorIQ processors available: P1011, P1020, and P2010
  • 6U VPX module
  • Conduction or air cooling
  • VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
  • Up to 8 GB DDR3 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 32 GB of CPU NAND flash
  • x4 PCI Express lane from CPU to switch
  • x4 PCI Express to XMC sites
  • Four x4 (x16 total) PCI Express lanes from switch to P1
  • One USB 2.0 port
  • Three Gigabit Ethernet ports
  • Two RS-232/422/485 serial ports
  • Two XMC/PrPMC interfaces
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY-178 BSP

Technical Specs

Processor

  • NXP (formerly Freescale) QorIQ P2020 processor
  • Dual Power Architecture® e500v2 cores at up to 1.2 GHz
  • 512 kB of shared L2 cache

Alternate Processor Configuration

  • P1011 processor with one Power Architecture® e500v2 core at up to 800 MHz
  • P1020 processor with two Power Architecture® e500v2 cores at up to 800 MHz
  • P2010 processor with one Power Architecture® e500v2 core at up to 1.2 GHz

Memory

  • Up to 8 GB of DDR3 ECC SDRAM
  • Up to 512 MB of NOR flash (with redundancy)
  • Up to 32 GB of NAND flash

XMC/PrPMC

  • PCI-X (64/32-bit, 100/66 MHz)
  • PCI (64/32-bit, 66/33 MHz)
  • x4 PCIe port to P15 and P25 (XMC)

VPX

  • VITA 46.0
  • VITA 46.11 (System Management on VPX)
  • VITA 46.4 (Four x4 PCIe lanes to P1)
  • VITA 46.7 (Two 1000BASE-BX Ethernet ports to P4)
  • VITA 46.9 (PMC and XMC I/O to P3, P4, P5, P6, mapping P3w1P4-P64s+X12d+X8d)

Front Panel

  • Two RS-232 serial ports
  • One Gigabit Ethernet port
  • One USB 2.0 port
  • General-purpose LEDs

Back Panel

  • Two RS-232/422/485 serial ports
  • Two Gigabit Ethernet ports
  • One USB 2.0 port

IPMI

  • Onboard management controller
  • VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)

Software Support

  • Wind River VxWorks BSP
  • Linux BSP
  • Green Hills INTEGRITY-178 BSP
  • Contact factory for availability of QNX Neutrino and LynuxWorks LynxOS BSPs

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements (Estimate)

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • XIt1040 (90060235) - 6U VPX Rear Transition Module with Gigabit Ethernet, SATA, USB, and Serial
  • XPand1011 (90072275) - Two-Slot 6U VPX Development Platform for Conduction-Cooled Modules with RTM I/O
  • XTend300 (90070180) - 1x Female DB-9 to 2x Male DB-9 Serial Port Converter

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Press Release

View the XCalibur1740
Press Release

View Press Release

Datasheet

View the XCalibur1740
Datasheet PDF

Download Datasheet

6U VPX SBCs

View the full selection of 6U VPX SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc