6U VPX REAR TRANSITION MODULE · SKU 90060235
XIt1040
The XIt1040 is a 6U VPX Rear Transition Module (RTM) per the VITA 46.10 specification, which supports I/O breakout from various X-ES single board computer (SBC) products.
When installed in an RTM slot of an appropriate 6U VPX backplane, the XIt1040 routes I/O signals from an associated SBC’s rear panel P2-P6 connectors through the VPX backplane to connectors on the XIt1040 to allow connection of these signals to external equipment.
Product Lifecycle
X-ES also offers comprehensive configuration and obsolescence management services, providing customers with direct control over non-interchangeable changes and extending product availability and serviceability well beyond standard end-of-life milestones.
Engineered for Extended Reliability
All X-ES products are designed and manufactured 100% in the USA with components from trusted supply chains in order to deliver rugged, reliable performance in the most demanding environments.
Built with components rated for extreme conditions and validated through rigorous testing, our solutions minimize obsolescence risk and lower total cost of ownership across the full program lifespan.
Introduction to XIt1040
The XIt1040 is a 6U VPX Rear Transition Module (RTM) per the VITA 46.10 specification, which supports I/O breakout from various X-ES single board computer (SBC) products.
When installed in an RTM slot of an appropriate 6U VPX backplane, the XIt1040 routes I/O signals from an associated SBC’s rear panel P2-P6 connectors through the VPX backplane to connectors on the XIt1040 to allow connection of these signals to external equipment.
I/O Connectivity
The XIt1040 routes two 10/100/1000BASE-T Ethernet ports to RJ-45 connectors, two RS-232 ports to a micro-DB-9 connector, five USB ports to USB Type A connectors, and six SATA ports to eSATA and standard SATA connectors.
A XIM/PIM site is also provided for breakout of a mezzanine installed on the corresponding SBC’s P14/P16 I/O to the XIt1040’s front panel via the appropriate XIM/PIM.
Audio Codec
The XIt1040 also features an optional onboard USB audio codec, with its audio inputs and outputs routed to 3.5 mm stereo jacks accessible internal to the card.
Ethernet
- Two 10/100/1000BASE-T Ethernet ports to RJ-45 connectors
Serial
- Two RS-232 ports to micro-DB-9 connectors
USB
- One USB port to front panel Type A connector on front panel
- Four USB ports to internal vertical Type A connectors
- One USB port from hub routed to optional on-board audio codec
SATA
- One SATA port to front panel eSATA connector
- Five SATA ports to internal vertical SATA connectors
DVI
- One dual-link DVI-D port to DVI connector
Audio
- USB audio codec
- Audio input and output ports to front panel 3.5 mm stereo jacks
Physical Characteristics
- VPX Rear Transition Module (RTM), VITA 46.10
- Dimensions: 233.35 mm x 80 mm
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
- Conformal coating available as an ordering option
Accessories
- XTend300 (90070180) – 1x Female DB-9 to 2x Male DB-9 Serial Port Converter
- Cable (30075004) – Serial, Micro D to DB-9, F to M, 3 ft.
- Cable (30075028) – HDMI to DVI-D, M to M, 2 Meter
- Cable (30075094) – Dual-link DVI-D to Dual-link DVI-D, M to M, 6 ft.
XIt1040
6U VPX Rear Transition Module with Gigabit Ethernet, SATA, USB, and Serial
Connect with a product expert today
Access technical documentation, board support packages, software, and other resources for working with the XIt1040. All X-ES products are backed by our four-hour customer support guarantee.
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Technical Documentation
SupportNet is your source for hardware manuals, technical support, and software downloads.






