XPedite5170

NXP (formerly Freescale) MPC8640D Processor-Based Conduction- or Air-Cooled 3U VPX-REDI Single Board Computer (SBC)

The XPedite5170 is a high-performance 3U VPX-REDI single board computer based on the NXP (formerly Freescale) MPC8640D processor. With dual PowerPC e600 cores running at up to 1.25 GHz, the MPC8640D delivers enhanced performance with AltiVec technology and IEEE 754 Dual-Precision Floating-Point and efficiency for today's network information processing and other embedded computing applications.

End of Life

Please see recommended replacement product, the XPedite5970 NXP T2080 3U VPX SBC.

Learn more about this product below »
SKU: 90030095 Category:
XPedite5170 3U VPX-REDI SBC

The XPedite5170 is a high-performance 3U VPX-REDI single board computer based on the NXP (formerly Freescale) MPC8640D processor. With dual PowerPC e600 cores running at up to 1.25 GHz, the MPC8640D delivers enhanced performance with AltiVec technology and IEEE 754 Dual-Precision Floating-Point and efficiency for today’s network information processing and other embedded computing applications.

The XPedite5170 supports two separate channels of up to 2 GB each ofup to DDR2-533 ECC SDRAM, as well as up to 4 GB of NAND flash and up to 256 MB of NOR flash (with redundancy). The XPedite5170 provides the option of utilizing a PCI Express or Serial RapidIO Fat Pipe P1 interconnect, as well as two SerDes Gigabit Ethernet Thin Pipe P1 fabric interconnects. The XPedite5170 also supports dual Gigabit Ethernet, GPIO, I²C, XMC I/O, PMC I/O, and up to two RS-232/422/485 serial ports through the P2 connector.

The XPedite5170 provides a ruggedized, high-performance, feature-rich solution to support the next generation of rugged embedded applications. Linux, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Package (BSPs) are available.

Features

  • NXP MPC8640D processor with dual PowerPC e600 cores at up to 1.25 GHz
  • 1 MB of L2 cache per core
  • 3U VPX (VITA 46) module
  • Ruggedized Enhanced Design Implementation (REDI)
  • Conduction or air cooling
  • Integrated AltiVec
  • IEEE 754-compliant 64-bit Floating-Point Unit (FPU)
  • Up to 4 GB (2 GB each) of up to DDR2-533 ECC SDRAM in two channels
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 4 GB of NAND flash
  • XMC/PrPMC interface
  • x4 PCI Express or serial RapidIO P1.A fabric interconnect
  • x4 PCI Express P1.B fabric interconnect
  • Two SerDes Gigabit Ethernet P1 fabric interconnects
  • Two 10/100/1000BASE-T Ethernet ports (optional)
  • Up to two RS-232/422/485 serial P2 ports
  • Front I/O available via plugover module
  • Green Hills INTEGRITY BSP
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP

Technical Specs

Processor

  • NXP (formerly Freescale) MPC8640D processor
  • Dual PowerPC e600 cores at 1.067 to 1.25 GHz
  • 1 MB of L2 cache per core
  • Integrated AltiVec
  • IEEE 754-compliant 64-bit FPU

Memory

  • Up to 4 GB (2 GB each) of up to DDR2-533 ECC SDRAM in two channels
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 4 GB of NAND flash

VPX (VITA 46) P1 I/O

  • x4 PCI Express or Serial RapidIO to P1.A
  • x4 PCI Express to P1.B
  • Two SerDes Gigabit Ethernet ports (or one 10/100/1000BASE-T port out P1 and one 10/100/1000BASE-T port out P2)
  • X12d XMC P16 I/O

VPX (VITA 46) P2 I/O

  • One 10/100/1000BASE-T port (when two SerDes Gigabit Ethernet P1 ports are not used)
  • Up to two RS-232/422/485 serial ports
  • I²C port
  • 3.3 V GPIO signals
  • P64s PMC P14 I/O

XMC/PrPMC Site

  • 32-bit, 66 MHz PCI bus (PMC interface)
  • x4 PCIe port (XMC interface)
  • P64s P14 I/O support
  • X12d P16 I/O support

Front Panel I/O

  • Front panel RJ-45 Ethernet and micro-DB-9 RS-232 serial ports available via optional plugover module

Software

  • Green Hills INTEGRITY BSP
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP

Physical Characteristics

  • 3U VPX-REDI conduction- or air-cooled form factor
  • Dimensions: 100 mm x 160 mm
  • 0.8 in. pitch without solder-side cover
  • 0.85 in. and 1.0 in. pitch with solder-side cover

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

MPC8640D at 1.067 GHz, DDR2-533, all interfaces active

  • 30 W per board

Accessories

  • XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable
  • XPand1004 (90071810) - 3U VPX Two-Slot Development System

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XPedite5170 3U VPX-REDI SBC
XPedite5170 — 3U VPX Single Board Computer

Information Request

Additional Information

Replacement Product

View the recommended replacement product, XPedite5970

View Product

Datasheet

View the XPedite5170
Datasheet PDF
 

Download Datasheet

3U VPX SBCs

View the full selection of 3U VPX SBCs from X-ES
 

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc