XPort1003

NXP PowerQUICC™ II MPC8270 Processor-Based Multi-Protocol Four-Port Serial Conduction-Cooled PMC Module

The XPort1003 is an intelligent communications controller targeting high-performance under extreme operating conditions.

It combines a wide array of supported serial protocols, a broad range of serial interface standards, and a flexible I/O routing structure to pack maximum flexibility into an industry-standard, conduction-cooled PMC module.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90010145 Categories: ,
XPort1003 Serial PMC Module

The XPort1003 is an intelligent communications controller targeting high-performance under extreme operating conditions. The XPort1003 combines a wide array of supported serial protocols, a broad range of serial interface standards, and a flexible I/O routing structure to pack maximum flexibility into an industry-standard, conduction-cooled PMC module.

Powered by the NXP (formerly Freescale) PowerQUICC™ II MPC8270, the XPort1003 implements four serial communication ports, each providing a reduced EIA-530-A-compatible signal set. It supports HDLC/SDLC, UART, transparent, and BiSync modes, with NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester encoding. Coupled with software-configurable support for RS-232, RS-422, RS-485, and MIL-STD-188-114 balanced type 2 mode, the XPort1003 provides a wide range of serial options.

The XPort1003 will minimize both the cost and power consumption of your system. Since the PCI bridge is integrated on-chip, the XPort1003 draws less power and costs less than conventional designs based on other processors that require a PCI bridge.

Features

  • NXP (formerly Freescale) PowerQUICC™ II MPC8270 processors at up to 300 MHz with integrated PCI
  • Four SCCs supporting a broad range of serial protocols
  • Conduction-cooled PMC
  • Up to 64 MB of ECC SDRAM
  • Up to 128 MB of soldered flash
  • 2 kB SEEPROM
  • Two RS-232 SMC ports (optional)
  • Rear panel I/O
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows NT/2000/XP driver

Technical Specs

Processor

  • NXP (formerly Freescale) PowerQUICC™ II MPC8270
  • Embedded PowerPC G2 core
  • Up to 300 MHz
  • 280 Dhrystones at 200 MHz
  • 66 MHz 60x bus
  • 16 kB instruction and data caches
  • 32 kB internal SRAM
  • Integrated MMU
  • Core disabled operation
  • 32-bit/66 MHz PCI

Memory

  • Up to 64 MB ECC SDRAM
  • Up to 128 MB surface-mount flash (optional)
  • 2 kB SEEPROM

Rear Panel I/O

  • Four multi-protocol SCC ports
  • Two RS-232 serial ports (optional)

Serial Communication Controller

  • HDLC, UART, transparent, and BiSync modes
  • DPLL supporting NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester
  • Independent BRGs for each SCC transmitter and receiver
  • 18.432 MHz external oscillator (default)
  • Custom frequency external oscillators (optional)

Serial Interface

  • Drivers software-configurable for RS-232, RS-422, RS-485, and MIL-STD-188-114 balanced type 2 mode
  • 10 Mbps max synchronous
  • 4 Mbps max asynchronous

Software

  • SCC and SMC drivers
  • Wind River VxWorks BSP
  • Linux BSP
  • Microsoft Windows NT/2000/XP driver

Physical Characteristics

  • Conduction-cooled PMC form factor
  • Dimensions: 143.75 mm x 74 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
  • Conformal coating available as an ordering option

Ruggedization

  • Conduction-cooled: VITA 47 Class V3 vibration, Class OS2shock

Power Requirements

  • +3.3 V, 0.6 A, 1.98 W
  • +5.0 V, 0.35 A, 1.75 W

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XPort1003
Datasheet PDF

Download Datasheet

PMC I/O Modules

View the full selection of PMC I/O Modules from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc