XTend4010

Nine-Slot 3U VPX/cPCI Hybrid Backplane

The XTend4010 3U hybrid system supports four VPX slots, three CompactPCI slots, a Gigabit Ethernet switch slot, and a fabric/bridge slot.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90020070 Category:
XTend4010 3U VPX/cPCI Hybrid Backplane

The XTend4010 3U hybrid system supports four VPX slots, three CompactPCI slots, a Gigabit Ethernet switch slot, and a fabric/bridge slot. System designers can take advantage of this feature by either using it as a development platform for migrating from CompactPCI to the VITA 46 (VPX) standard, or a fully deployable system capable of supporting legacy CompactPCI devices.

Four VPX slots are provided in this system. Each VPX slot has a direct connection to adjacent VPX slots, as well as the fabric/bridge slot. The fabric/bridge slot provides high-speed switching for the VPX backplane, as well as a PCI bridge to communicate with the CompactPCI bus segment.

Three 3U CompactPCI slots are provided. The PCI bus is capable of operating at 33 or 66 MHz and is 32 bits wide.

X-ES backplanes are available as an integrated component of our embedded systems, and are not sold separately.

Features

  • Four VPX slots
  • Three CompactPCI peripheral slots
  • One PCI bridge/switch slot
  • x4 PCI Express switch when used with the XChange3010
  • One redundant x2 switch slot
  • Redundant Gigabit Ethernet switches when used with the XChange3011
  • One development/debug I/O connector (optional)
  • One ATX power connector (optional)
  • Selectable +5 V/+3.3 V CompactPCI VIO Power
  • Any of the four VPX slots, or an XMC/PMC on the XChange3010, may be configured as system controller

Technical Specs

VPX Slots

  • Star fabric topology (A fabric)
  • Ring fabric topology (B/C fabrics)
  • Four x4 PCIe links when used with the XChange3010

CompactPCI

  • Three CompactPCI peripheral slots
  • 32-bit PCI bus
  • 33 MHz or 66 MHz frequency operation

Ethernet

  • Two redundant Gigabit Ethernet switch fabrics provided when used with the XChange3011

Serial

  • One serial port from each of the four VPX slots may be accessed in a rugged fashion via a front panel connector on the XChange3011

XIt4010 Debug Card

  • One USB port from each of the four VPX slots may be accessed via an XIt4010 debug card
  • One serial port from each of the four VPX slots may be accessed via an XIt4010 debug card
  • One Gigabit Ethernet port providing access to each to the two Gigabit Ethernet fabrics may be accessed via an XIt4010 debug card

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XTend4010
Datasheet PDF

Download Datasheet

Backplanes

View the full selection of Backplanes from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc