XPand1030

3U cPCI Two-Slot Conduction-Cooled Development Platform for Cisco® 5940

The XPand1030 backplane provides CompactPCI bus between the two slots. Ethernet, RS-232 serial I/O, and DVI are routed to RJ-45, micro-DB-9, and HDMI connectors for easy access. The XPand1030 is the ideal solution for rapid prototyping mobile ad hoc networks (MANET) based on the Cisco® 5940 ESR. The 5940 3U cPCI hardware is complemented by Cisco IOS® Software and Cisco® Mobile Ready Net capabilities.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
XPand1030 3U cPCI Development System for Cisco® 5940

The XPand1030 system is a low-cost debug, development, and display platform for 3U conduction-cooled cards. It supports one X-ES CompactPCI SBC and the Cisco® 5940 with direct Ethernet and serial I/O access to each board.

The XPand1030 backplane provides CompactPCI bus between the two slots. Ethernet, RS-232 serial I/O, and DVI are routed to RJ-45, micro-DB-9, and HDMI connectors for easy access.

The XPand1030 is the ideal solution for rapid prototyping mobile ad hoc networks (MANET) based on the Cisco® 5940 ESR. The 5940 3U cPCI hardware is complemented by Cisco IOS® Software and Cisco® Mobile Ready Net capabilities. With support for Dynamic Link Exchange Protocol (DLEP), the latest protocol in the Radio Aware Routing (RAR) family of protocols that enable communication between a router and a radio in a mobile ad hoc network, the 5940 provides highly secure yet scalable video, voice, and data services for mobile and embedded outdoor networks.

Features

  • Supports system slot 3U cPCI module
  • Supports Cisco® 5940 in peripheral slot
  • Integrated heatsink fins
  • Built-in cooling fans
  • Reset switch
  • CompactPCI bus routed between slots
  • One front panel RJ-45 Gigabit Ethernet port from SBC
  • Three front panel RJ-45 Gigabit Ethernet ports from Cisco® 5940
  • RS-232 serial port from each slot routed to micro-DB-9 connectors
  • Front panel HDMI port from SBC
  • Front panel USB 2.0 port from SBC
  • Front panel eSATA port from SBC

Technical Specs

Connectors

  • One 3U cPCI SBC slot
  • One Cisco® 5940 slot
  • ATX power supply connector
  • Four RJ-45 Ethernet connectors
  • One USB Type A connector
  • One eSATA connector
  • One HDMI connector
  • Two micro-DB-9 connectors

Utility Functions

  • Front panel reset switch
  • Back panel power switch
  • Back panel power rail LED indicators

Cisco® 5940 Module

  • Ruggedized 3U CompactPCI embedded router
  • Cisco IOS® Software

I/O Routing

  • J1 (SBC slot) Ethernet port  routed to J2 (Cisco® 5940 slot) Ethernet port 0
  • J1 (SBC slot) Ethernet port 1 routed to RJ-45 connector
  • J2 (Cisco® 5940 slot) Ethernet ports 1 through 3 routed to RJ-45 connectors
  • J1 and J2 serial ports routed to micro-DB-9 connectors

External Power Supply

  • ATX power supply

Maximum Power Capacity

  • 100 W total

Accessories

  • Cable (90000075) - Serial, Micro D to DB-9, F to M, 3 ft.
  • ATX Power Supply (70003134)

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XPand1030 3U cPCI Development System for Cisco® 5940
XPand1030 — 3U CompactPCI Development System

Information Request

Additional Information

Datasheet
 

View the XPand1030
Datasheet PDF
 

Download Datasheet

cPCI Development Systems

View the full selection of
cPCI Development Systems
from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc