XPedite6201

The XPedite6201 is a high-performance PrPMC single board computer. With dual NXP (formerly Freescale) MPC7448 Power Architecture® processors running at up to 1.4 GHz, the XPedite6201 is ideal for the high bandwidth processing requirements of today’s blade and general computing applications.

A Marvell Discovery III system controller provides a high-performance communications channel between the processor, a DDR SDRAM interface, two Gigabit Ethernet interfaces, and a PCI-X PMC interface. The XPedite6201 supports up to 1 GB of local DDR-333 memory.

For the system designer, the XPedite6201 provides a feature-rich solution to support the next generation of embedded applications. Board Support Packages (BSPs) are available for Linux, Green Hills INTEGRITY, Wind River VxWorks, LynuxWorks LynxOS, and QNX Neutrino.

Features

• Single or dual NXP (formerly Freescale) MPC7448 processor
• Conduction- or air-cooled 3U cPCI card
• One conduction- or air-cooled PCI-X PMC slot
• Extended shock/vibration tolerance
• Up to 1 GB of DDR-333 SDRAM
• 128 MB soldered flash
• Two rear I/O Gigabit Ethernet interfaces
• Two RS-232 serial ports
• PMC P14 backplane I/O
• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• LynuxWorks LynxOS BSP

Technical Specs

Processor

• Dual NXP (formerly Freescale) MPC7448 processors
• 1.4 GHz max processor speed
• 133 MHz bus speed
• 32 kB L1 instruction/data caches
• 1 MB L2 cache

PCI-X

• 133 MHz bus
• 64-bit interface

Non-Volatile Storage

• Up to 128 MB soldered flash

DDR SDRAM

• Up to 1 GB of DDR-333

Bellcore 1089

• Front panel Ethernet surge protection

Possible Ethernet Configurations

• One front panel port and one P14 port
• Two P14 ports

Possible RS-232 Serial Configurations

• One front panel port and one P14 port
• Two P14 ports

PTMC P14 I/O

• Supports PTMC configuration 5 Ethernet

Software

• Linux BSP
• Wind River VxWorks BSP
• Green Hills INTEGRITY BSP
• QNX Neutrino BSP
• LynuxWorks LynxOS BSP

Physical Characteristics

• PMC form factor
• Dimensions: 149 mm x 74 mm, 15 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
• Conformal coating available as an ordering option

Power Requirements (Estimate)

• 3.3 V, 8.18 A, 27 W

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet