XCalibur4341

Intel® Core™ i7 Processor-Based Conduction- or Air-Cooled 6U VPX Single Board Computer (SBC)

The XCalibur4341 provides two separate channels of up to 8 GB DDR3-1066 ECC SDRAM, two XMC/PrPMC slots, 32 MB of NOR flash and up to 128 GB of NAND flash. The XCalibur4341 also supports five Gigabit Ethernet ports, two DVI-D graphics ports, audio, I²C, PMC I/O, XMC I/O, and RS-232/422/485 serial ports out the front panel and/or backplane connector.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050215 Category:
XCalibur4341 6U VPX SBC

The XCalibur4341 is a high-performance, 6U VPX, multiprocessing, single board computer that is ideal for ruggedized systems requiring high bandwidth processing and low power consumption. With the Intel® Core™ i7 processor and Intel® QM57 chipset, the XCalibur4341 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.

The XCalibur4341 provides two separate channels of up to 8 GB DDR3-1066 ECC SDRAM, two XMC/PrPMC slots, 32 MB of NOR flash and up to 128 GB of NAND flash. The XCalibur4341 also supports five Gigabit Ethernet ports, two DVI-D graphics ports, audio, I²C, XMC I/O, PMC I/O, and RS-232/422/485 serial ports out the front panel and/or backplane connector.

The XCalibur4341 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Operating system support for Wind River VxWorks, Microsoft Windows, QNX Neutrino, and Linux is available.

Features

  • Intel® Core™ i7-610E, -620LE, -620UE, and -660UE processors
  • Dual-core with Hyper-Threading Technology
  • 6U VPX module
  • OpenVPX™ standards-based
  • Conduction or air cooling
  • Up to 8 GB DDR3-1066 ECC SDRAM in two channels
  • 32 MB NOR boot flash
  • Up to 128 GB of NAND flash
  • Five Gigabit Ethernet ports
  • x8 Gen2 PCI Express ports from switch to CPU and XMC sites
  • Four x4 Gen2 PCI Express ports from switch to backplane
  • Two DVI-D graphics ports
  • Audio line I/O port
  • Four SATA ports on backplane
  • Three USB 2.0 ports (one to front panel and two to backplane)
  • Two RS-232/422/485 serial ports
  • Two PrPMC/XMC interfaces
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • Microsoft Windows drivers

Technical Specs

Processor

  • Intel® Core™ i7 processor operating at 2.53, 2.0, 1.06, or 1.33 GHz
  • Dual-core with Hyper-Threading Technology
  • Intel® QM57 chipset
  • Dual-channel integrated memory controller
  • Integrated graphics controller
  • 4 MB of shared cache

Memory

  • Up to 8 GB DDR3-1066 ECC SDRAM in two channels
  • 32 MB of NOR flash
  • Up to 128 GB of NAND flash
  • 16 kB I²C EEPROM

Graphics

  • Integrated high-performance 3D graphics controller
  • Two DVI-D (one to front panel, one to P6)

VPX

  • OpenVPX™ (VITA 65)
  • Four x4 Gen2 PCIe ports to P1
  • Two 1000BASE-BX Ethernet ports to P4
  • Two 10/100/1000BASE-T Ethernet ports
  • PMC and XMC I/O to P3, P4, P5, P6, mapping P3w1P4-P64s+X12d+X8d

PrPMC

  • PCI-X (64/32-bit, 100/66 MHz)
  • PCI (64/32-bit, 66/33 MHz)

XMC

  • x8 Gen2 PCIe ports to J15 and J25
  • One SATA port capable of 3 Gb/s to J26

Front Panel I/O (Optional)

  • One HDMI video interface
  • One 10/100/1000BASE-T Ethernet port
  • One USB 2.0 port
  • General-purpose LEDs

Back Panel

  • Two RS-232/422/485 serial ports
  • Two 10/100/1000BASE-T Ethernet ports
  • Two 1000BASE-BX Ethernet ports
  • Four SATA ports capable of 3 Gb/s
  • PMC I/O
  • Four USB 2.0 ports
  • Audio line I/O port

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Greens Hills INTEGRITY BSP
  • Microsoft Windows drivers

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

  • XPand1011 (90072275) - Two-Slot 6U VPX Development Platform for Conduction-Cooled Modules with RTM I/O

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

View the recommended replacement product, XCalibur4540

View Product

Product Brief

Built-In Test (BIT)
Product Brief
 

View Brief

Datasheet

View the XCalibur4341
Datasheet PDF
 

Download Datasheet

6U VPX SBCs

View the full selection of 6U VPX SBCs from X-ES
 

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc