The XCalibur4443 is a high-performance, multiprocessing, 6U VPX, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. Using the 3rd generation Intel® Core™ i7 processor, the XCalibur4443 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.
The XCalibur4443 provides 16 GB of DDR3 ECC SDRAM in two channels, two XMC/PrPMC slots, 32 MB of NOR flash, and up to 64 GB of SATA NAND flash over two drives. The XCalibur4443 also supports four Gigabit Ethernet ports, a DVI-D/HDMI graphics port, audio, I²C, XMC and PMC I/O, and RS-232/422/485 serial ports out the backplane.
The XCalibur4443 is a conduction-cooled design compliant with the Two-Level Maintenance (2LM) standard defined in VITA 48.2 Type 1. The XCalibur4443 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.
Technical Specs
Processor
- Quad- or dual-core Intel® Core™ i7
- Intel® Turbo Boost Technology
- Intel® Hyper-Threading Technology
- AVX instruction set extensions
- Integrated with Intel® QM67 chipset
- Dual-channel integrated memory controller
- Integrated high-performance 3D graphics controller
Quad-Core Processor Configurations
- Core™ i7-3612QE: 2.1 GHz, 6 MB cache
- Core™ i7-3615QE: 2.3 GHz, 6 MB cache
Dual-Core Processor Configurations
- Core™ i7-3555LE: 2.5 GHz, 4 MB cache
- Core™ i7-3517UE: 1.7 GHz, 4 MB cache
Memory
- Up to 16 GB of DDR3 ECC SDRAM in two channels
- 32 MB of NOR flash
- Up to 64 GB of SATA NAND flash over two drives
- 16 kB I²C EEPROM
Graphics
- Integrated high-performance 3D graphics controller
- DVI-D/HDMI to back panel
VPX
- VITA 46.11 (System Management on VPX)
- Compliant to the VITA 48.2 Type 1, Two-Level Maintenance (2LM) standard
- OpenVPX™ (VITA 65)
- Four x4 PCI Express Gen2 interfaces to P1
- Two 1000BASE-BX Ethernet ports to P4
- Two 10/100/1000BASE-T Ethernet ports to P4
- XMC and PMC I/O to P3, P4, P5, P6, mapping P3w1P4-P64s+X12d+X8d
PrPMC
- PCI-X (64/32-bit, 100/66 MHz)
- PCI (64/32-bit, 66/33 MHz)
XMC
- x4 PCI Express Gen2 interfaces to J15 and J25
Back Panel
- Two RS-232/422/485 serial ports
- Two 10/100/1000BASE-T Ethernet ports
- Two 1000BASE-BX Ethernet ports
- Four SATA ports capable of 3 Gb/s
- XMC and PMC I/O
- Four USB 2.0 ports
- One DVI-D/HDMI graphics port
- Intel® High Definition Audio port (optional)
Security and Management
- Baseboard Management Controller (IPMI)
- VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
- Trusted Platform Module (TPM) (optional)
- Non-volatile memory write protection
Software Support
- Wind River VxWorks BSP
- Linux BSP
- Microsoft Windows drivers
- Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
