XPedite7130

Intel® Core™2 Duo Processor-Based Conduction- or Air-Cooled 3U cPCI Single Board Computer (SBC)

The XPedite7130 accommodates up to 4 GB of DDR2-400 ECC SDRAM to support memory-intensive applications, and hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA 1.5 Gb/s, and RS-232/422/485 through the P2 backplane connector.

End of Life

Please see recommended replacement product, the XPedite7530 3U CompactPCI SBC.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90030060 Category:
XPedite7130 3U cPCI SBC

The XPedite7130 is a high-performance, low-power 3U cPCI single board computer based on the Intel® Core™2 Duo processor. With two Gigabit Ethernet ports and a 33 MHz PCI interface, the XPedite7130 is ideal for high-bandwidth data-processing applications.

The XPedite7130 accommodates up to 4 GB of DDR2-400 ECC SDRAM to support memory-intensive applications, and hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA 1.5 Gb/s, and RS-232/422/485 through the P2 backplane connector.

Linux 2.6, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs), as well as Microsoft Windows drivers, are available for the XPedite7130.

Features

  • Intel® Core™2 Duo processor at up to 1.8 GHz
  • 3U cPCI module
  • Conduction or air cooling
  • Up to 4 GB of DDR2-400 ECC SDRAM
  • Up to 2 MB firmware hub flash (or 1 MB with redundancy)
  • 4 GB of NAND flash
  • XMC/PrPMC interface with front panel I/O support
  • 32-bit, 33 MHz cPCI rear panel interface
  • Two rear panel Gigabit Ethernet ports with integrated magnetics
  • Two rear panel USB 2.0 high-speed ports
  • Six rear panel SATA 1.5 Gb/s ports
  • Two rear panel RS-232/422/485 serial ports
  • Front I/O available via plugover module
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • Microsoft Windows drivers

Technical Specs

Processor

  • Intel® Core™2 Duo at up to 1.8 GHz
  • 200 MHz (800 MT/s) FSB
  • Up to 6 MB of L2 cache

Memory

  • Up to 4 GB of DDR2-400 ECC SDRAM
  • Up to 2 MB firmware hub flash (or 1 MB with redundancy)
  • 4 GB of NAND flash

J1 cPCI

  • 32-bit, 33/66 MHz PCI interface
  • System controller capable with onboard clocking and arbitration
  • Peripheral slot capable

J2 cPCI Interface

  • Two Gigabit Ethernet ports
  • Six SATA 1.5 Gb/s ports
  • Two USB 2.0 ports
  • Two RS-232/422/485 serial ports
  • I²C port
  • 3.3 V GPIO signals

PrXMC/PMC Site

  • 32-bit, 33 MHz PCI bus (PMC interface)
  • x4 PCIe port (XMC interface)

Front Panel I/O

  • Front panel RJ-45 Ethernet, USB, and micro-DB-9 RS-232 serial ports available via optional plugover module

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • Microsoft Windows drivers

Physical Characteristics

  • 3U cPCI conduction- or air-cooled form factor
  • Dimensions: 100 mm x 160 mm
  • 0.8 in. pitch

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1 (608) 833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

View the recommended replacement product, XPedite7530

View Product

Datasheet

View the XPedite7130
Datasheet PDF
 

Download Datasheet

3U cPCI SBCs

View the full selection of 3U cPCI SBCs from X-ES
 

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc