XPort1005

NXP (Freescale) PowerQUICC™ II MPC8270 Processor-Based Multi-Protocol Four-Port Serial PMC I/O Module

The XPort1005 is an intelligent communications controller targeting high-performance, serial applications. The XPort1005 combines a wide array of supported serial protocols and a configurable I/O routing structure to pack maximum flexibility into an industry-standard PMC module.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90010220 Categories: ,
XPort1005 Four-Port Serial PrPMC Module

The XPort1005 is an intelligent communications controller targeting high-performance, serial applications. The XPort1005 combines a wide array of supported serial protocols and a configurable I/O routing structure to pack maximum flexibility into an industry-standard PMC module.

Powered by the NXP (formerly Freescale) PowerQUICC™ II MPC8270 processor, the XPort1005 implements four serial communication ports providing an EIA-530-A-compliant signal set supporting HDLC/SDLC, UART, transparent, and BiSync modes, along with NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester encoding. Coupled with software configurable support for RS-232, RS-422, RS-423, RS-485, and MIL-STD-188-114A, the XPort1005 provides a wide range of serial options.

The XPort1005 will drive down both cost and power consumption from your system design. The PCI bridge is integrated on-chip, allowing the XPort1005 to draw up to 40% less power and costs up to 30% less than conventional designs based on other processors.

Features

  • NXP (formerly Freescale) PowerQUICC™ II MPC8270 processor at up to 450 MHz with integrated PCI
  • Four SCCs support broad range of serial protocols
  • Software configurable serial interface modes
  • Front or rear I/O
  • Up to 512 MB SDRAM
  • Up to 64 MB soldered flash
  • Two RS-232 SMC ports (optional)
  • Back panel 10/100 Mbps Ethernet (optional)
  • Linux BSP
  • Wind River VxWorks BSP
  • VxWorks, Linux, Windows, and OSE drivers

Technical Specs

Processor

  • NXP (formerly Freescale) PowerQUICC™ II MPC8270 processor
  • Embedded PowerPC G2 core
  • 300 MHz max processor speed
  • 280 Dhrystones at 200 MHz
  • 66 MHz 60x bus
  • 16 kB L1 instruction/data caches
  • 32 kB internal SRAM
  • Integrated MMU
  • Floating-Point Unit
  • Core-disabled mode

Memory

  • Up to 512 MB SDRAM
  • 64 MB surface-mount flash
  • 2 kB SEEPROM

Serial Communication Controller

  • HDLC, UART, transparent, and BiSync modes
  • DPLL supporting NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester
  • Independent BRGs for each SCC transmitter and receiver
  • Two external custom oscillators (optional)

Serial Interface

  • Four software-configurable SCC ports supporting RS-232, RS-422, RS-423, RS-485, and MIL-STD-188-114A Type I and II balanced/unbalanced modes
  • 10 Mbps max synchronous
  • 4 Mbps max asynchronous
  • EIA-530-A DTE/DCE software selectable

Software

  • Linux BSP
  • Wind River VxWorks BSP
  • VxWorks, Linux, Windows, and OSE drivers

Physical Characteristics

  • PMC form factor
  • Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Power Requirements (Typical)

  • +3.3 V, 0.6 A, 1.98 W
  • +5.0 V, 0.35 A, 1.75 W
  • +12.0 V, 0.012 A, 0.15 W
  • -12.0 V, 0.012 A, 0.15 W

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XPort1005
Datasheet PDF

Download Datasheet

PMC I/O Modules

View the full selection of PMC I/O Modules from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc