XIt1048

6U VPX Rear Transition Module with Gigabit Ethernet, SATA, USB, and Serial

The XIt1048 is a 6U VPX Rear Transition Module (RTM), which supports I/O breakout from the X-ES XCalibur4643 6U VPX SBC.

When installed in an RTM slot of an appropriate 6U VPX backplane, the XIt1048 routes I/O signals from an associated SBC's rear panel P1 and P3-P6 connectors through the VPX backplane to connectors on the XIt1048 to allow connection of these signals to external equipment.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90060420 Categories: ,
XIt1048 6U VPX Rear Transition Module (RTM)

The XIt1048 is a 6U VPX Rear Transition Module (RTM), which supports I/O breakout from select X-ES 6U VPX single board computers. When installed in an RTM slot of an appropriate 6U VPX backplane, the XIt1048 routes I/O signals from an associated SBC’s rear panel P1 and P3-P6 connectors through the VPX backplane to connectors on the XIt1048 to allow connection of these signals to external equipment.

The XIt1048 routes four 10/100/1000BASE-T Ethernet ports to RJ-45 connectors, one USB 2.0 port and one USB 3.0 port to USB Type A connectors, four SATA interfaces to two mSATA ports, one eSATA port, a SFF-8644 mini-SAS connector, and four serial interfaces available as twoRS-232/422/485 and two RS-232 to two micro-DB-9 connectors. Default configuration supports RS-232 from RP6 to front panel, with an optional hardware configuration to alternatively support RS-232 from RP2 to the front panel.

A dataplane breakout site connects two x4 Fat Pipes from the P1 connector to breakout modules that convert the signals to standard connectors. This facilitates rapid prototyping of complex system topologies using standard, off-the-shelf equipment.

Features

  • 6U VPX Rear Transition Module (RTM)
  • Four 10/100/1000BASE-T Ethernet ports
  • Two 10GBASE-T Ethernet ports via dataplane breakout modules
  • Four serial ports to two micro-DB-9 connectors
  • One USB 2.0 port
  • One USB 3.0 port
  • One eSATA port
  • Two mSATA ports
  • One SFF-8644 mini-SAS port

Technical Specs

Ethernet

  • Four 10/100/1000BASE-T Ethernet ports to RJ-45 connectors
  • Two 10GBASE-T Ethernet ports via dataplane breakout modules

Serial

  • Two micro-DB-9 connectors, each containing two serial interfaces
  • Two RS-232/422/485 serial interface from RP5
  • One RS-232 serial interface from RP1
  • One RS-232 serial interface from RP6 with optional hardware configuration to alternatively support RS-232 from RP2

USB

  • One USB 2.0 port and one USB 3.0 port to USB Type A connectors on front panel

SATA

  • Two SATA ports to mSATA connectors
  • One eSATA port
  • One SFF-8644 with four SATA channels

Dataplane Breakout

  • One dataplane breakout site
  • Two 10GBASE-T Ethernet ports to RJ-45 connectors via XIt3000 breakout modules (optional)

Physical Characteristics

  • 6U VPX Rear Transition Module (RTM)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XIt1048
Datasheet PDF

Download Datasheet

6U VPX RTMs

View the full selection of 6U VPX RTMs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc