XIt4103

6U cPCI I/O Transition Module for the XCalibur4101

The XIt4103 supports a dual-link DVI port for graphics, as well as two PICMG 2.16 10/100/1000 Ethernet ports, one eSATA port, one pair of audio in and out ports, and two USB ports. Internal connectors allow access to two additional USB ports, a SATA port, and two serial ports.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90060165 Categories: ,
XIt4103 6U cPCI RTM

The XIt4103 is a 6U CompactPCI transition module which supports a variety of cPCI single board computers.

The XIt4103 supports a dual-link DVI port for graphics, as well as two PICMG 2.16 10/100/1000 Ethernet ports, one eSATA port, one pair of audio in and out ports, and two USB ports. Internal connectors allow access to two additional USB ports, a SATA port, and two serial ports.

The XIt4103 supports a PIM interface to bring P14 I/O from a PMC module out the rear panel. The PIM interface can support all standard X-ES I/O modules, including the XIt2000, XIt2010, XIt2020, and XIt2030. Optionally, a second PIM interface can be included. This option requires removal of the audio in port, DVI port, and both the eSATA and serial ports.

Features

  • 6U cPCI transition module
  • One dual-link DVI jack
  • Two PICMG 2.16 10/100/1000 Ethernet ports
  • Supports one PIM (PMC I/O Module) interface to route PMC I/O out the rear panel
  • Second PIM site (optional)
  • Two USB 2.0 ports
  • One eSATA jack or two RS-232 serial ports sharing one micro-DB-9 jack
  • One audio out port (optional)
  • One audio in port (optional)
  • One internal SATA port (optional)
  • Two internal USB ports
  • Two internal serial ports
  • GPIO header in board

Technical Specs

PIM Support

  • Supports standard PIM modules, including the XIt2000, XIt2010, XIt2020, and XIt2030
  • Support for second PIM (optional)

DVI Graphics

  • One external dual-link DVI-D port (optional)

SATA

  • One external eSATA port (optional)
  • One internal SATA port (optional)

Ethernet

  • Two RJ-45 Gigabit Ethernet ports

USB

  • Two external USB ports
  • Two internal USB ports

Serial

  • Two internal RS-232/422/485 serial ports
  • Two rear-panel RS-232 serial ports through micro-DB-9 (optional)

Audio (Optional)

  • One external audio in port
  • One external audio out port
  • TI PCM2902 audio CODEC

Physical Characteristics

  • 6U cPCI transition module form factor
  • Dimensions: 233.35 mm x 80 mm

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Accessories

  • XTend300 (90070180) - 1x Female DB-9 to 2x Male DB-9 Serial Port Converter
  • XIt2041 (90060220) - PIM with Ethernet, USP, Serial, DVI
  • Cable (90000075) - Serial, Micro D to DB-9, F to M, 3 ft.
  • Cable (90000170) - HDMI to DVI-D, M to M, 2 Meter
  • Cable (90000220) - Dual-link DVI-D to Dual-link DVI-D, M to M, 6 ft.
  • Cable (90000240) - 3-Pin Serial

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet

View the XIt4103
Datasheet PDF

Download Datasheet

6U cPCI RTMs

View the full selection of 6U cPCI RTMs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc