XTend3100

Dual XMC/PrPMC Carrier for Development and Testing

The XTend3100, in conjunction with a standard off-the-shelf ATX power supply, provides a complete desktop or benchtop PCI/PCI-X PrPMC and XMC platform for development, evaluation, and testing, without the need for an expensive and bulky CompactPCI/VME PMC carrier card and chassis.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

XTend3100 Dual XMC/PrPMC Development Carrier

The XTend3100 is a dual PMC carrier card designed to provide a low-cost and compact platform for PMC modules. The XTend3100, in conjunction with a standard off-the-shelf ATX power supply, provides a complete desktop or benchtop PCI/PCI-X PrPMC and XMC platform for development, evaluation, and testing, without the need for an expensive and bulky CompactPCI/VME PMC carrier card and chassis.

The XTend3100 features four, integrated, 40 mm fans arranged in a push-pull configuration to provide ample airflow for even the most power-hungry PrPMCs (up to 45 W each). The XTend3100 also provides onboard +5 V, +3.3 V, and -12 V power supplies, sourcing only +12 V from the ATX power supply. This arrangement avoids the voltage drop and ampacity problems commonly associated with powering high-performance PrPMCs using ATX supplies.

Another common problem with PrPMC development is lack of early access to P14 rear I/O ports. This is especially troublesome with conduction-cooled PrPMCs, which by design do not have Ethernet or serial access via front panel connectors. The XTend3100 solves this problem by providing a PIM (PMC I/O Module) site for each PrPMC. These sites, when used in conjunction with the appropriate PIM (e.g., XIt2020 or XIt2040), can provide the necessary I/O during the early development stage, when custom backplanes/wiring harnesses are often not available.

The XTend3100 also features JTAG test support through two addressable scan port JTAG devices, which isolate each PMC onto its own JTAG chain to provide maximum JTAG test speed and isolation. A 7×2 header is provided for use with boundary scan test equipment.

Features

  • Dual PCI/PCI-X PrPMC sites up to 133 MHz
  • One monarch and one non-monarch PrPMC site
  • Dual PIM sites for PMC P14 rear I/O
  • XMC support
  • ATX power supply connector
  • Onboard +5 V, +3.3 V, and -12 V power supplies
  • ASP JTAG support
  • Backplane test support

Technical Specs

PCI-X

  • Dual 32/64-bit PCI/PCI-X sites up to 133 MHz
  • Conventional PCI 33/66 MHz or PCI-X 66/100/133 MHz
  • Auto PCI speed and mode detection

XMC

  • Point-to-point connectivity between XMC 0 and XMC 1
  • 100 MHz reference clock provided to each XMC site

Cooling

  • Four integrated 40 mm fans
  • Push-pull airflow

Power Supplies

  • Onboard +5 V, +3.3 V, and -12 V supplies
  • Supplies up to 90 W combined to PrPMC sites
  • Only +12 V is sourced from ATX supply

PMC Rear I/O

  • Two PIM sites for PMC Rear I/O
  • Hardwired RJ-45 Ethernet and DB-9 serial (optional)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Power Requirements (from ATX supply)

  • 12 V, 7.56 A, 90.72 W

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Datasheet
 

View the XTend3100
Datasheet PDF
 

Download Datasheet

XMC/PMC Development Systems

View the full selection of XMC/PMC Development Systems from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc