XPedite2300

Virtex-6 FPGA-Based Conduction- or Air-Cooled XMC Module

The XPedite2300 is a high-performance reconfigurable conduction- or air-cooled XMC module based on the Xilinx Virtex-6 family of FPGAs. With a x8 PCI Express interface, external memory, and high-density I/O, the XPedite2300 is ideal for customizable, high-bandwidth, data-processing applications.

End of Life

Please see the recommended replacement product, the XPedite2400 XMC FPGA module.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90010190 Category:
XPedite2300 XMC FPGA Module

The XPedite2300 is a high-performance reconfigurable conduction- or air-cooled XMC module based on the Xilinx Virtex-6 family of FPGAs. With a x8 PCI Express interface, external memory, and high-density I/O, the XPedite2300 is ideal for customizable, high-bandwidth, data-processing applications.

The XPedite2300’s DDR3 SDRAM and flexible I/O routing makes it perfect for high-speed, bandwidth-intensive applications. The card provides numerous I/O capabilities through its 180- and 40-pin daughter card headers which provide access to single-ended and differential I/O and configurable GTX transceivers. X-ES offers daughter card modules for high-performance A/D, D/A, high-density I/O, and custom I/O solutions.

Features

  • Xilinx Virtex-6 FPGA LX130T, LX195T, LX240T, LX365T, SX315T, or SX475T
  • Conduction- or air-cooled XMC module
  • Up to 1 GB of DDR3 SDRAM in two channels
  • Volatile and non-volatile FPGA configuration flash
  • 80 MB of user NOR flash
  • 180-pin, high-density daughter card header for expandable I/O
  • 40-pin daughter card header for high speed serial
  • Front and rear panel I/O support
  • x8 PCI Express XMC interface
  • Super cap backup for configuration bit stream encryption key (optional)
  • I²C RTC with super cap backup
  • Configuration via PCIe, flash, and JTAG with multi-boot support
  • Linux BSP
  • Wind River VxWorks BSP

Technical Specs

FPGA

  • Xilinx LXT or SXT Virtex-6 for high performance logic and DSP applications

Memory

  • Up to 1 GB of DDR3 SDRAM in two channels
  • 80 MB user NOR flash
  • 384 MB FPGA configuration flash
  • 128 MB volatile configuration PSRAM

XMC Interface

  • x8 PCI Express port
  • Program FPGA and configuration flash via PCIe
  • Four GPIO via I²C expander

P14 User I/O

  • 44 FPGA LVTTL/LVDS user I/O

P16 I/O

  • Four GPIO via I²C expander
  • x4 GTX transceivers

Front I/O

  • Up to 150 LVTTL/LVDS and x8 GTX transceivers

Software

  • Linux BSP
  • Wind River VxWorks BSP
  • Reference designs in VHDL

Physical Characteristics

  • XMC conduction- or air-cooled form factor
  • Dimensions: 149 mm x 74 mm, 10 mm stacking height
  • 12 mm stacking height option

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

Please see the recommended replacement product, the XPedite2400

View Product

Board Support

FPGA Development Kit (FDK) Overview
 

Learn More

Datasheet

View the XPedite2300
Datasheet PDF
 

Download Datasheet

XMC FPGAs

View the full selection of XMC FPGAs from X-ES
 

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc