XCalibur1531

NXP (formerly Freescale) MPC8572E Processor-Based Conduction- or Air-Cooled 6U VME Module

The XCalibur1531 provides two separate channels of up to 4 GB (2 GB each) DDR2-800 ECC SDRAM, two PrXMC/PrPMC slots, as well as 256 MB of NOR flash (with redundancy). The XCalibur1531 also supports four Gigabit Ethernet ports, XMC I/O, PMC I/O, and RS-232/422/485 serial ports out the front panel and/or P2/P0 backplane connectors.

End of Life

Please contact X-ES Sales for assistance with choosing a recommended replacement product.

Learn more about this product below »
SKU: 90050150 Category:
XCalibur1531 6U VME SBC

The XCalibur1531 is a high-performance, multiprocessing, 6U VME, single board computer that is ideal for ruggedized systems requiring high bandwidth processing and low power consumption. With dual Power Architecture® e500 cores running at up to 1.5 GHz, the NXP (formerly Freescale) MPC8572E delivers enhanced performance and efficiency for today’s embedded computing applications.

The XCalibur1531 provides two separate channels of up to 4 GB (2 GB each) DDR2-800 ECC SDRAM, two PrXMC/PrPMC slots, as well as 256 MB of NOR flash (with redundancy). The XCalibur1531 also supports four Gigabit Ethernet ports, XMC I/O, PMC I/O, and RS-232/422/485 serial ports out the front panel and/or P2/P0 backplane connectors.

The XCalibur1531 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Operating system support for Wind River VxWorks, Microsoft Windows, QNX Neutrino, and Linux is available.

Features

  • NXP PowerQUICC™ III MPC8572E processor with dual Power Architecture® e500 cores at up to 1.5 GHz
  • 6U VME module
  • Conduction or air cooling
  • Up to 4 GB DDR2-800 ECC SDRAM in two channels
  • Up to 256 MB of NOR flash (with redundancy)
  • Up to 16 GB of NAND flash
  • Four Gigabit Ethernet ports
  • x8 PCI Express to XMC sites
  • Three USB 2.0 ports
  • Two RS-232/422/485 serial ports
  • Two PrXMC/PrPMC interfaces
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Technical Specs

Processor

  • NXP (formerly Freescale) PowerQUICC™ III MPC8572E processor
  • Dual Power Architecture® e500 cores at up to 1.5 GHz
  • 1 MB of shared L2 cache

Memory

  • Up to 4 GB of DDR2 ECC SDRAM in two channels
  • Up to 16 GB of NAND flash
  • Up to 256 MB of NOR flash (with redundancy)
  • 16 kB I²C EEPROM

VME

  • VME64 (VITA 1-1994 R2002)
  • VME64x (VITA 1.1-1997 R2003)
  • 2eSST (VITA 1.5-2003)
  • Ethernet on VME64x (VITA 31.1-2003)
  • PMC I/O on VME (VITA 35-2000)

XMC/PrPMC

  • PCI-X (64/32-bit, 100/66 MHz)
  • PCI (64/32-bit, 66/33 MHz)
  • x8 PCIe port to P15 and P25 (XMC)

Front Panel

  • Two RS-232 serial ports
  • One Gigabit Ethernet port
  • One USB 2.0 port
  • General-purpose LEDs

Back Panel

  • Two RS-232/422/485 serial ports
  • Three Gigabit Ethernet ports
  • PMC I/O
  • Two USB 2.0 ports

Software

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Greens Hills INTEGRITY BSP

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

Accessories

Please contact X-ES Sales at sales@xes-inc.com or by phone at +1-608-833-1155 for information on this product's accessories.

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

XCalibur1531 6U VME SBC
XCalibur1531 — 6U VME Single Board Computer

Information Request

Additional Information

Datasheet

View the XCalibur1531
Datasheet PDF

Download Datasheet

6U VME SBCs

View the full selection of 6U VME SBCs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2024 Extreme Engineering Solutions, Inc