The XCalibur4501 is a high-performance 6U CompactPCI single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the 5th generation Intel® Core™ i7 Broadwell-H processor, the XCalibur4501 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications. The XCalibur4501 leverages Intel® Iris™ Pro graphics for graphics-intensive applications and serves as a general-purpose GPU for demanding data processing applications.
The XCalibur4501 provides up to 16 GB DDR3L-1600 ECC SDRAM in two separate channels, two XMC/PrPMC slots, and up to 64 GB of NAND flash. The XCalibur4501 also hosts numerous I/O ports, including Gigabit Ethernet, USB, SATA, graphics, and RS-232/422/485 through the backplane connectors.
The XCalibur4501 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.
Technical Specs
Processor
- 5th generation Intel® Core™ i7 (Broadwell-H)
- 4th generation Intel® Core™ i7 (Haswell)
- Integrated high-performance 3D graphics controller
- Up to Intel® Iris™ Pro Graphics 6200
Memory
- Up to 16 GB of DDR3L-1600 ECC SDRAM in two channels
- Up to 64 GB of NAND flash
- 64 MB NOR boot flash
- 64 kB EEPROM
cPCI
- 33/66 MHz 32-bit PCI interface to J1 and J2
- PICMG 2.1 (Hot Swap support)
- PICMG 2.3 (PMC I/O to P3 and P5)
- PICMG 2.9 (dedicated IPMI controller)
- PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)
PrPMC
- PCI-X (32/64-bit, 66/100 MHz)
- PCI (32/64-bit, 33/66 MHz)
XMC (VITA 42.3)
- x8 PCI Express Gen3-capable
Rear Panel I/O
- Two 10/100/1000BASE-T Ethernet ports
- Two SATA ports capable of 3 Gb/s
- Two USB 2.0 ports
- HDMI/DVI-D interface
- Two RS-232/422/485 serial ports
- 3.3 V GPIO signals
- PMC I/O
Additional Features
- Non-volatile memory write protection
- Optional Trusted Platform Module (TPM)
- IEEE 1588 support on one Gigabit Ethernet port
- Intel® Active Management Technology (AMT) supported by Intel® vPro™ Technology
Software Support
- Wind River VxWorks BSP
- Linux BSP
- Microsoft Windows drivers
- Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs
Physical Characteristics
- 6U CompactPCI conduction-cooled form factor
- Dimensions: 233 mm x 160 mm
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
- Conformal coating available as an ordering option
- Thermal performance will vary based on CPU frequency and application
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
