SFF SOLID-STATE STORAGE  ·  SKU 90075245

XPort6197

The XPort6197 is a secure Self-Encrypting Drive (SED) / dual Solid-State Drive (SSD) Small Form Factor (SFF) module hosting two independent 1 TB SSDs, for a total available storage of 2 TB. Each SSD has its own x4 PCI Express Gen3 interface routed to the P5100 rugged SFF connector.

The XPort6197’s security features include AES-256 encryption, where the encryption key can be purged in less than one second.

Category:
XPort6197 2 TB Small Form Factor (SFF) Dual Solid-State Drive (SSD)

 

01At a Glance

Form Factor
Small Form Factor (SFF)
Dimensions: 116 mm (L) x 80 mm (W) x 9.5 mm (H)

Storage Capacity
Up to 2 TB
Configurable SLC or TLC technology

Drive Performance
Up to 1.8 GB/s write, up to 2 GB/s read
With end-to-end data protection

Security
256-bit AES Encryption, TCG Opal 2.0 compliant
Extensive security protocols supported

Ruggedization
Level 5
Conduction-cooled

Product Lifecycle

X-ES also offers comprehensive configuration and obsolescence management services, providing customers with direct control over non-interchangeable changes and extending product availability and serviceability well beyond standard end-of-life milestones.

Engineered for Extended Reliability

All X-ES products are designed and manufactured 100% in the USA with components from trusted supply chains in order to deliver rugged, reliable performance in the most demanding environments.

Built with components rated for extreme conditions and validated through rigorous testing, our solutions minimize obsolescence risk and lower total cost of ownership across the full program lifespan.

 

02Core Capabilities

Introduction to XPort6197

The XPort6197 is a secure Self-Encrypting Drive (SED) / dual Solid-State Drive (SSD) Small Form Factor (SFF) module hosting two independent 1 TB SSDs, for a total available storage of 2 TB.

Each SSD has its own x4 PCI Express Gen3 interface routed to the P5100 rugged SFF connector.

Encryption & Key Erasure

The XPort6197’s security features include AES-256 encryption, where the encryption key can be purged in less than one second.

Sanitization Protocols

In addition, the XPort6197 supports sanitization protocols per the NVMe® specification, including block erase and overwrite.

All of the sanitization protocols can be invoked via in-band software commands.

Endurance

By utilizing solid-state NVM Express® technology, the XPort6197 provides a high-performance, high-density, reliable memory solution.

Each 1 TB NVMe® device on the card yields 480 TB of write endurance in 100% TLC mode and 8,000 TB of write endurance in 100% SLC mode.

Read/Write Performance

The XPort6197 provides best-in-class performance, with 1.8 GB/s sustained sequential write and 2 GB/s sustained sequential read rates on each of its two independent NVMe® interfaces.

Security & Data Protection

The XPort6197 is intended for applications requiring secure data storage and is ideal for programs with demanding Anti-Tamper (AT) or Information Assurance (IA) requirements.

The XPort6197 is capable of operating in the most rugged operating environments by utilizing directly soldered storage, rather than implementing a carrier-based approach for commercial storage form factors such as M.2.

 

03Block Diagram

 

04Technical Specifications

P5100 I/O SFF Connector

  • One NVMe® interface on pins 3-24
  • One NVMe® interface on pins 27-48

Security

  • AES-256 hardware encryption, compliant with TCG Opal 2.0
  • Support for multiple sanitization protocols
  • Declassification via software control
  • Key erasure in less than one second
  • Ideal for Anti-Tamper (AT) and Information Assurance (IA) requirements

Supported Sanitization Protocols

  • Block erase
  • Overwrite
  • Crypto erase

Storage Characteristics

  • NVMe® 1.3c compliant (PCIe Gen3)
  • Configurable SLC or TLC technology
  • 2 TB capacity (1 TB per PCI Express interface)
  • 1.8 GB/s write per NVMe® interface
  • 2 GB/s read per NVMe® interface
  • End-to-end data protection

Physical Characteristics

  • Small Form Factor (SFF) conduction-cooled module
  • Dimensions: 116 mm (L) x 80 mm (W) x 9.5 mm (H)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
  • Conformal coating available as an ordering option

Power Requirements

  • Power will vary based on configuration and usage. Please consult factory.

 

XPort6197 is also available as a fully customizable, derivative design.

Through our derivative design services, X-ES can modify the standard pinout, I/O, form factor, and other key attributes to meet specific requirements, providing the proven performance of a COTS foundation with the tailored fit of a custom solution.

 

05Request Information

XPort6197 2 TB Small Form Factor (SFF) Dual Solid-State Drive (SSD)

XPort6197

Small Form Factor (SFF) Removable NVM Express® Dual Solid-State Drive (SSD) with 2 TB Capacity

Connect with a product expert today

 

06Documentation & Resources

Access technical documentation, board support packages, software, and other resources for working with the XPort6197. All X-ES products are backed by our four-hour customer support guarantee.

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documentation

SupportNet is your source for hardware manuals, technical support, and software downloads.

Access SupportNet

Solid-State Storage

View the full selection of Small Form Factor (SFF) Solid-State Storage (SSD) Modules from X-ES.

View All

 

07Related Products

 

Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2026 Extreme Engineering Solutions, Inc