XPedite6100

The XPedite6100 is a high-performance, XMC/PrPMC, single board computer supporting an NXP QorIQ T1042 processor.

The T1042 processor offers four e5500 cores running at up to 1.4 GHz with a single channel of DDR3 memory, all within a low power envelope. Alternate processors T1022 and T2081 are available.

The XPedite6100 provides a high-performance, feature-rich solution for current and future generations of embedded applications. Linux, Wind River VxWorks, QNX Neutrino, Green Hills INTEGRITY, and LynuxWorks LynxOS Board Support Packages (BSPs) are available.

Features

• NXP QorIQ T1042 processor with four Power Architecture® e5500 cores at up to 1.4 GHz
• Alternate NXP QorIQ processors: T1022 and T2081
• Air-cooled
• Up to 8 GB of DDR3 ECC SDRAM
• Up to 512 MB of NOR flash (with redundancy)
• Up to 32 GB of NAND flash
• x4 PCI Express interface to P15 Gen2 (T10xx) or Gen3 (T2081)
• PCI PrPMC interface
• Four Gigabit Ethernet ports
• Two RS-232/422/485 serial ports
• Two USB 2.0 ports
• Two SATA ports to P16
• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• LynuxWorks LynxOS BSP

Technical Specs

Processor

• NXP QorIQ T1042 processor with four Power Architecture® e5500 cores at up to 1.4 GHz
• 256 kB back-side L2 cache (per core)
• 256 kB platform cache
• IEEE 754 Floating-Point Unit support

Alternate Processor Configurations

• T1022 (two e5500 cores) at up to 1.4 GHz
• T2081 (four dual-threaded e6500 cores) at up to 1.8 GHz

Memory

• Up to 8 GB of DDR3 ECC SDRAM
• Up to 512 MB of NOR flash (with redundancy)
• Up to 32 GB of NAND flash

PrPMC Interface

• 66/33 MHz PCI
• 32-bit bus interface

P15 XMC Interface

• x4 PCI Express Gen2 (T10xx) or Gen3 (T2081)

P14/P16 XMC/PMC Interface

• Two 10/100/1000BASE-T Ethernet ports to P14
• One 10/100/1000BASE-T Ethernet port to P16
• Two RS-232/422/485 serial ports
• 3.3 V GPIO
• Up to two USB 2.0 ports
• Two SATA ports capable of 6 Gb/s

Front Panel I/O

• One Gigabit Ethernet port
• Two RS-232 serial ports
• One USB 2.0 port

Software Support

• Wind River VxWorks BSP
• Linux BSP
• Green Hills INTEGRITY-178 BSP
• Contact factory for availability of QNX Neutrino and LynuxWorks LynxOS BSPs

Physical Characteristics

• Air-cooled XMC/PMC form factor
• Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3
• Conformal coating available as an ordering option

Power Requirements

• Power will vary based on configuration and usage. Please consult factory.

Accessories

• XIt2501 (90040005) - PMC I/O Module (PIM) with Gigabit Ethernet, SATA, USB, Serial, and Mini DisplayPort
• XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable
• XTend3100 (90050115) - Dual XMC/PrPMC Carrier for Development and Testing

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet