XIt1082

3U VPX Rear Transition Module with Gigabit Ethernet, SATA, USB, Serial, and HDMI

The XIt1082 routes four 10/100/1000BASE-T Ethernet ports to RJ-45 connectors, four RS-232/422/485 ports to micro-DB-9 connectors, two USB 2.0 ports to USB Type A connectors, and four SATA ports (two via mSATA connectors). A XIM site is also provided for breakout of the mezzanine's P16 I/O to the XIt1082's front panel via the appropriate XIM.

End of Life (EOL)

Please see the recommended replacement product, the XIt1086 3U VPX Rear Transition Module.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90040030 Category:
XIt1082 3U VPX Rear Transition Module (RTM)

The XIt1082 is a 3U VPX Rear Transition Module (RTM), which supports I/O breakout from select X-ES Intel® Xeon® D 3U VPX SBCs. When installed in an RTM slot of an appropriate 3U VPX backplane, the XIt1082 routes I/O signals from an associated SBC’s rear panel P0-P2 connectors through the VPX backplane to connectors on the XIt1082 to allow connection of these signals to external equipment. The XIt1082 routes four 10/100/1000BASE-T Ethernet ports to RJ-45 connectors, four RS-232/422/485 ports to micro-DB-9 connectors, two USB 2.0 ports to USB Type A connectors, and four SATA ports (two via mSATA connectors). A XIM site is also provided for breakout of the mezzanine’s P16 I/O to the XIt1082’s front panel via the appropriate XIM.

One dataplane breakout site connects two x4 Fat Pipes from the P1 and P2 connector to breakout modules that convert the signals to standard connectors. This facilitates rapid prototyping of complex system topologies using standard, off-the-shelf equipment.

Features

  • 3U VPX Rear Transition Module (RTM)
  • Four 10/100/1000BASE-T Ethernet ports
  • Two 10GBASE-T Ethernet ports via dataplane breakout modules
  • Four RS-232/422/485 serial ports
  • Two USB 2.0 ports
  • Four SATA ports (two via mSATA connectors)
  • One XIM site

Technical Specs

Ethernet

  • Four 10/100/1000BASE-T Ethernet ports to RJ-45 connectors

Serial

  • Four RS-232/422/485 ports to micro-DB-9 connectors

USB

  • Two USB 2.0 ports to USB Type A connectors on front panel

SATA

  • Two SATA ports to mSATA connector
  • Two SATA ports to internal SATA connectors

Dataplane Breakout

  • One dataplane breakout site
  • Two 10GBASE-T Ethernet ports to RJ-45 connectors via XIt3000 breakout module (optional)
  • x4 PCIe Gen2 via Molex iPASS™ connector

XIM Support

  • One XIM site
  • X12d support

Physical Characteristics

  • 3U VPX Rear Transition Module (RTM)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Accessories

  • Cable (90000075) - Serial, Micro D to DB-9, F to M, 3 ft.
  • Cable (90000245) - DisplayPort to DisplayPort, M to M, 6 ft.
  • Cable (90000250) - DisplayPort to HDMI, M to M, 6 ft.
  • Cable (90000255) - DisplayPort to DVI-D, M to M, 6 ft.
  • Cable (70000084) - mSATA to SATA HDD/SDD Adapter

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

View the recommended replacement product, XIt1086

View Product

Datasheet

View the XIt1082
Datasheet PDF

Download Datasheet

3U VPX RTMs

View the full selection of 3U VPX RTMs from X-ES

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc