XCalibur1200

Single/Dual NXP MPC7447A/7448 Processor-Based Air-Cooled 6U cPCI Single Board Computer with PICMG 2.16 Ethernet

The XCalibur1200 provides a highly-configurable processing platform. Two SO-DIMM DDR SDRAM sockets provide up to 1 GB of local memory. An optional CompactFlash interface accepts up to 1 GB of non-volatile memory. Two PCI-X PrPMC slots are available for high bandwidth I/O.

End of Life

Please see recommended replacement product, the XCalibur1900 NXP QorIQ T2080 6U cPCI SBC.

Learn more about this product below »
REQUEST A QUOTE ASK A QUESTION

Contact us directly at +1 (608) 833-1155

SKU: 90050040 Category:
XCalibur1200 6U cPCI SBC

The XCalibur1200 is a 6U CompactPCI single board computer with a PICMG 2.16 Gigabit Ethernet backplane interface and dual NXP MPC7447A/7448 1.4 GHz processors. It is well-suited for telecom, industrial, and general computing applications.

The XCalibur1200 provides a highly-configurable processing platform. Two SO-DIMM DDR SDRAM sockets provide up to 1 GB of local memory. An optional CompactFlash interface accepts up to 1 GB of non-volatile memory. Two PCI-X PrPMC slots are available for high bandwidth I/O.

Hot Swap support allows the XCalibur1200 to be installed into a live system without disrupting CompactPCI bus activity. In addition, system management bus support allows the card to be powered down and reset remotely through the IPMI interface.

For the system designer, the XCalibur1200 provides a feature-rich solution to support the next generation of embedded applications.

Features

  • Single/dual NXP (formerly Freescale) MPC7447A/7448 Power Architecture® 1.4 GHz processors
  • Dual PCI-X PrPMC slots
  • Autosense system/peripheral slot
  • Hot Swap support
  • Up to 1 GB DDR SDRAM
  • Up to 128 MB soldered flash
  • Three front panel Gigabit Ethernet ports
  • Complies to PICMG 2.0, 2.1, 2.3, 2.9, and 2.16
  • Wind River VxWorks BSP
  • Linux BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP

Technical Specs

Processor

  • Single/dual NXP (formerly Freescale) Power Architecture® MPC7447A/7448 processors
  • 1.40 GHz max processor speed
  • 133 MHz bus speed
  • 32 kB L1 instruction/data caches
  • Up to 1 MB L2 cache

Memory

  • Dual DDR SO-DIMM SDRAM
  • Up to 144 MB soldered NOR flash
  • 512 kB socketed NOR flash
  • 512 byte SEEPROM

cPCI

  • Operates in system or peripheral slot (jumper selectable)
  • PICMG 2.1 (Hot Swap support)
  • PICMG 2.3 (routes PMC I/O to P3 and P5)
  • PICMG 2.9 (dedicated IPMI controller)
  • PICMG 2.16 (two 10/100/1000 BASE-T Ethernet ports)

PCI-X PMC Slots

  • Maximum aggregate bandwidth of 1 Gb/s
  • Processor PMC (PrPMC) support

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Greens Hills INTEGRITY BSP
  • Ethernet and IPMI drivers

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Power Requirements

  • 3.3 V, 3.8 A, 12.54 W
  • 5 V, 1.95 A, 9.75 W

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet

Block Diagram

Additional Information

Replacement Product

View the recommended replacement product, XCalibur1900

View Product

Datasheet

View the XCalibur1200
Datasheet PDF
 

Download Datasheet

6U cPCI SBCs

View the full selection of 6U cPCI SBCs from X-ES
 

View All
Back to Top
Fast, Flexible, and Customer-Focused Embedded Solutions
© 2018 Extreme Engineering Solutions, Inc